Posts: 13,388
Threads: 4
Joined: Jun 2007
Location: New Jersey
(02-07-2018, 05:09 PM)overland Wrote: Can anyone tell me where I can get them, both for a 10-12" saw and a larger approx. 24 inch frame saw? I'm thinking of making the saws but need to find a source for blades. I know about Tools for Working Wood, but are there others?
Highland Hardware on the web carries ECE blades for frame saws, and they have a 12" bow saw blade as well. You can resharpen the frame saw blades, I don't know about the bow saw blades. The frame saw blades are sized in mm, so construct accordingly.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 711
Threads: 0
Joined: Oct 2007
Location: N. Illinois
Mike B.
One thing is for certain though. Whichever method you use, you can be absolutely certain that you are most assuredly doing it wrong. Axehandle, 2/24/2016
Do not get in to much of a hurry buddy... Arlin, 5/18/2022
Apology excepted. TT. 2/25/20223
Posts: 12,275
Threads: 0
Joined: Jun 2007
Location: Bucks County PA
(02-07-2018, 05:09 PM)overland Wrote: Can anyone tell me where I can get them, both for a 10-12" saw and a larger approx. 24 inch frame saw? I'm thinking of making the saws but need to find a source for blades. I know about Tools for Working Wood, but are there others?
What are the dimensions on the saw blade? I've made custom blades for bow saws up to 28" long before. Usually they are around 1-1/2" wide. Any narrower and they won't fit in the retoother
See ya around,
Dominic
------------------------------
Don't you love it when you ask someone what time it is and to prove how smart they are, they tell you how to build a watch?
Posts: 3,719
Threads: 0
Joined: Nov 2010
You see them hanging in about every antique shop....the infamous Butcher's Meat saw..
...wel, the blade works nicely if a frame saw as well.
[attachment=8026]
You can reuse the blade clamps from the old saw frame....
[attachment=8027]
Might even be a bit easier to sharpen, too..
[attachment=8028]
Just keep an eye out for them...
Show me a picture, I'll build a project from that
Posts: 951
Threads: 0
Joined: Mar 2007
I almost bought an old one recently until I noticed that the blade couldn't be rotated for ripping longer pieces. It was fixed in a position parallel to the frame.