Posts: 12,467
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I wouldn't get the 55". I did (2-55") and regretted it. If you only intend to buy one more section, go with the 76". That way you get a broader range of lengths you can use and the 76" by itself is extremely handy. Over time I wound up with the 76", and eventually bought the 106" (or whatever it is) when I found a really good deal on one (years ago). One thing about joining 2 tracks together, you don't butt them up; but leave about a 1/16" gap between the 2. To me it always was a chore to get them perfectly straight.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 724
Threads: 0
Joined: Jan 2007
Location: ATL
I'd get the 55" with the 32mm hole system. That will be the most versatile. It will cut the 8' sheets with ease and allow you to carry both in the carry bag if you are going mobile. Even if you're not, 2 x 55" are easier to store than a 76" + 55".
The holes are just a bonus should you ever decide to go with the 32 system and an OF1010 router. I think the Bosch system is just about as good and costs less than half the price. Even after you add/buy their holy rail.
Now, if you're cutting 8' sheets on a regular basis ; the 106" rail is the only way to fly. Except if you need portability and it won't fit in your vehicle.
Posts: 434
Threads: 0
Joined: Feb 2007
I’d get the 75 for 3 reasons in descending order of likelihood:
1. Can cut Baltic birch without joining another rail
2. combined with the 55 you have you can cut 8 foot goods on the diagonal if you have to for some reason.
3. Combined with your 55 you could cut 10 foot sheet goods
This advice is likely too late.
Posts: 12,467
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Did you decide which one to get?
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,305
Threads: 0
Joined: Jul 2004
I've used this system for about 10 years. Here's what I highly recommend:
Yes: a 55 is perfect for cutting 48". I do this a lot.
No: avoid cheaping out and buying a second 55 so you can connect them to cut a 96" cut. This is a frustrating process.
Yes: spend the big money and get the 105". It's comically expensive but you'll smile every time you use it. Just pull the trigger and don't think about the cost: you've already drunk the Kool aid if you've got the saw.
Future Yes: next year get the 32" (or so) track. This isn't essential in the beginning but is super handy.
Future Yes: consider the multifunction table. I love mine and am considering getting a second. I don't even remember life before the Kool Aid
[mic dropped]
Posts: 3,390
Threads: 1
Joined: Jan 2002
Agree with everything Murray says. The MFT is probably the most used tool in my shop. I have the Festool vacuum clamp hanging off the side and there’s almost nothing I need my regular bench for except for bonafide hand planing which (obviously) is next to impossible on the MFT.
It is by far my biggest tool surprise. I bought it on a lark when one came up on Craigslist. Prior to that I thought anybody that had one was an person for spending that kind of coin.
-Marc
Posts: 200
Threads: 0
Joined: Dec 2010
One option if you got/get a shorter track is the Betterly Straightline connector (which Toolnut also sales). This ensures the two tracks are connected near perfectly and is easy to use. They are more useful for people that need their system to be portable but also useful if you want to get a holey rail and don't want to get a long rail and a holey rail.
Posts: 12,467
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I hadn't heard of the Betterly connector until now. Clever (and expensive) idea...but probably useful to a lot of folks.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.