10-14-2018, 12:56 PM
I'm finally getting my shop put back together and I need to change the drive belt on my Craftsman Bandsaw (Model 119.2240110). I took the blade off, and removed the C-clip, but the wheel won't slide off. I can't tell if it's stuck or if there is another step I'm missing. I even tried to take the whole assembly out by loosening the four bolts on the back of the unit, but nothing will budge.
Any thoughts? I've never done this before and I'd rather not break anything.
Chris
Any thoughts? I've never done this before and I'd rather not break anything.
Chris
Chris
Less is more. Unless you're standing next to the one with more.
Then less just looks pathetic.
www.woodntreasures.com
Less is more. Unless you're standing next to the one with more.
Then less just looks pathetic.
www.woodntreasures.com