01-10-2019, 05:34 PM
Any suggestions on a source for a reasonably priced 10" combination carbide sawblade (for wood) with a diamond knockout? I have received and returned 3 from Amazon, all which had a diamond arbor knockout shown in the product description. Even heard back from a vendor on the 'Bay that their sawblade, while listing description includes it, after checking, let me know that it does not...
Doesn't have to be topshelf, as this will only receive very occasional use.
This is for a vintage Skilsaw Model 107 (wormdrive) that only accepts that <> arbor configuration.
I have read about home brewed versions of laying out/scribing/"dremeling" the KO in a standard blade, but would prefer factory version. I have seen 10.25", but I am pretty sure that the limit is 10" on this saw. If someone knows better/differently, I am all ears...
Thanks in advance
Brian
Doesn't have to be topshelf, as this will only receive very occasional use.
This is for a vintage Skilsaw Model 107 (wormdrive) that only accepts that <> arbor configuration.
I have read about home brewed versions of laying out/scribing/"dremeling" the KO in a standard blade, but would prefer factory version. I have seen 10.25", but I am pretty sure that the limit is 10" on this saw. If someone knows better/differently, I am all ears...
Thanks in advance
Brian