02-10-2019, 03:15 PM
These - https://www.amazon.com/gp/product/B001DT...UTF8&psc=1 are very similar to the clamp screws that used to be available from (I think) LV and others. I used a couple to make a bench-on-bench a couple of years ago and then the Jorgensen product disappeared. The screws in the above link are almost identical and the price is right. The screws are 0.73" in diameter. The threaded traveler is larger in diameter than the original Jorgensen, 1.0625" rather than 1". This only matters if you want to bury it in the rear chop (I'm making a Moxon vise). I do, so I ordered a 1 1/16" forstner bit to make the excavation.
Mike B.
One thing is for certain though. Whichever method you use, you can be absolutely certain that you are most assuredly doing it wrong. Axehandle, 2/24/2016
Do not get in to much of a hurry buddy... Arlin, 5/18/2022
Apology excepted. TT. 2/25/20223
One thing is for certain though. Whichever method you use, you can be absolutely certain that you are most assuredly doing it wrong. Axehandle, 2/24/2016
Do not get in to much of a hurry buddy... Arlin, 5/18/2022
Apology excepted. TT. 2/25/20223