03-18-2019, 10:09 PM
I've decided to give away my ClearVue cyclone and 6" PVC duct work. I bought this in 2006 and used it on and off for ~10 years without any issues. We recently moved to a smaller house and there is no way a unit of this height will work in my garage so I'm going to have get a small mobile dust unit when I get my shop set up. I've decided that I got plenty of use out of this unit and rather than deal with selling it, I'm going to give it away for free to someone who can continue to put it to good use. Obviously this is one of the older (2006) ClearVue designs. This is an all or nothing deal - I'm cleaning out stuff so I want to get rid of everything. Here's what's included:
- ClearVue cyclone body, impeller, and Leeson 5 HP motor
- ~10 4-6' long pieces of 6" pipe
- large box of 6" PVC fittings
- trash can and lid
- several 6" blast gates and ductwork hangers
- filter base with clean out
- home made wall mount
You would still need to buy a new filter and a motor contactor (and probably a remote control outlet to trigger the contactor). It's going to require a 240V, 30A circuit to run.
Here's the original install from 2006: http://www.gallery2.clearvuecyclones.com...CVMax/Ted/
Here's the motor info: https://electricmotorwarehouse.com/5-hp-...r-120554c/
I'm located in Glendale CA near the 134 and the 2 freeways.
- ClearVue cyclone body, impeller, and Leeson 5 HP motor
- ~10 4-6' long pieces of 6" pipe
- large box of 6" PVC fittings
- trash can and lid
- several 6" blast gates and ductwork hangers
- filter base with clean out
- home made wall mount
You would still need to buy a new filter and a motor contactor (and probably a remote control outlet to trigger the contactor). It's going to require a 240V, 30A circuit to run.
Here's the original install from 2006: http://www.gallery2.clearvuecyclones.com...CVMax/Ted/
Here's the motor info: https://electricmotorwarehouse.com/5-hp-...r-120554c/
I'm located in Glendale CA near the 134 and the 2 freeways.