#16
  
Tis the season, once again...got up into the 70s, yesterday!

3 sales, struck on 2, but the Rummage Sale had a few items.. Winkgrin 
[attachment=17827]

So, what is so interesting in this $2.25 pair of tools?   Screwdriver seems to be an older Stanley, with a square shank in a fluted wood handle.. Cool 
[attachment=17828]
[attachment=17829]
The $2 Hammer is a Brass ball peen...with a lot of lettering stamped in the head... Cool  
[attachment=17830]
seems a local railroad in the area was known as the C.C.C. & St. L. R.R. ( The Big 4, before New York Central took over..)

Been well used ( or abused Confused  ).
[attachment=17831]
That be a hole into the ball end...hammer needs a wedge yet, and the clean up/rehab will be done..
Show me a picture, I'll build a project from that
Reply

#17
  Rummage Sale Finds. bandit571 Tis the season, once...
Nice tools. Is that a deep dent or a hole in the hammer?
Reply
#18
  Rummage Sale Finds. bandit571 Tis the season, once...
That be a hole in the ball end.... No
Show me a picture, I'll build a project from that
Reply

#19
  RE: Rummage Sale Finds. bandit571 That be a hole in th...
(04-12-2019, 04:18 PM)bandit571 Wrote: That be a hole in the ball end.... No

You have to wonder why. Confused  Could it be brazed and filed back to shape?

Phil
Reply

#20
  RE: Rummage Sale Finds. Phil S. [quote='bandit571' p...
(04-14-2019, 01:34 PM)Phil S. Wrote: You have to wonder why. Confused  Could it be brazed and filed back to shape?

Phil

Could it be some sort of custom hammer that should have a hole in it?
That hole just doesn't look like it got there accidentally.

Otherwise I would use hard welding rod in a stick welder to fill it in with the hammer face (other end of the head) submerged in water. Braze is way too soft.
Part timer living on the western coast of Finland. Not a native speaker of English
Reply
#21
  Rummage Sale Finds. bandit571 Tis the season, once...
The hold in the hammer could have been a defect in the casting (if the head were cast brass). I like old vintage hammers. So many custom sizes and uses. and if they were well-taken care of, the patina on the handles just can't be matched.
Still Learning,

Allan Hill
Reply

#22
  RE: Rummage Sale Finds. AHill The hold in the hamm...
(04-14-2019, 06:07 PM)AHill Wrote: The hold in the hammer could have been a defect in the casting (if the head were cast brass).  I like old vintage hammers.  So many custom sizes and uses. and if they were well-taken care of, the patina on the handles just can't be matched.
............................
I like hammers and have a couple dozen or so...I guess I am a collector, particularly of small hammers, and I also love the patina that only age can create..I am also a hammer "maker"....I made the jeweler's hammer on the right about 40yrs ago..I used a 3/4" grade eight bolt and an old Atlas metal lathe..I agree with Alan that the "hole" could just be a flaw in the casting. But I'm not sure why anyone would "need" a brass Ball Pein, since the softer brass would be quickly "deformed" in use..unless the "brass" is actually Beryllium copper.  Confused

EDIT...I particularly like the hammer on the left because it is engraved "From George to Eliza, Class of 1903".....


"Retreat hell, we are attacking in a different direction"
Col. Chesty Puller C/O Ist Marines....Chosin Reservoir 1950
Jack Edgar, Sgt. USMC Korean War 51/52
Get off my lawn ! Upset





Reply
#23
  Rummage Sale Finds. bandit571 Tis the season, once...
Unless one of the valves gets a bit sticky... Rolleyes
 [attachment=17872]
And a steel "Engineer's hammer would do more harm than good....
Show me a picture, I'll build a project from that
Reply

#24
  RE: Rummage Sale Finds. bandit571 Unless one of the va...
(04-15-2019, 11:02 AM)bandit571 Wrote: Unless one of the valves gets a bit sticky... Rolleyes
 
And a steel "Engineer's hammer would do more harm than good....
,,,,,,,,,,,,,,,,,,,,,,,,,
Brass hammer yes, but for that you don't need a ball pein..I have brass hammers but none shaped like a rounded ball pein...I don't recall ever seeing one, so it seems to be pretty rare to me...Looks like you have a collectors item Big Grin
"Retreat hell, we are attacking in a different direction"
Col. Chesty Puller C/O Ist Marines....Chosin Reservoir 1950
Jack Edgar, Sgt. USMC Korean War 51/52
Get off my lawn ! Upset





Reply

#25
  RE: Rummage Sale Finds. Timberwolf [quote='bandit571' p...
(04-14-2019, 04:23 PM)TGW Wrote: Could it be some sort of custom hammer that should have a hole in it?
That hole just doesn't look like it got there accidentally.

Otherwise I would use hard welding rod in a stick welder to fill it in with the hammer face (other end of the head) submerged in water. Braze is way too soft.

Welding a brass hammer head would be near impossible with a stick welder.

(04-15-2019, 11:40 AM)Timberwolf Wrote: ,,,,,,,,,,,,,,,,,,,,,,,,,
Brass hammer yes, but for that you don't need a ball pein..I have brass hammers but none shaped like a rounded ball pein...I don't recall ever seeing one, so it seems to be pretty rare to me...Looks like you have a collectors item Big Grin

I'm thinking brass might be used for other reasons also. To not create sparks around gas/fuel
Steve





 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020

 When I use the toilet it smells just like fresh brewed coffee!
fredp 02/13/2020







Reply
Rummage Sale Finds.


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.