05-10-2019, 06:43 PM
I'm finishing a live edge Cherry bar top. Customer (friend) picked Armor Seal Satin from samples. I've now put 3 coats full strength down, scuff sanding between coats and removing all dust. After 3rd coat dried, the piece looks perfect, until using a severe raking light, then I can see considerable brush marks. I'm using a good natural bristle brush with extremely light tip off.. Everything looks great wet, but the problem shows up when overnight dry.
I suspect it simply not leveling, but what to do about that??
*a thinned final coat
*a thinned final coat of gloss (could the flatteners be the issue?)
*a different application method
Something else.....
I suspect it simply not leveling, but what to do about that??
*a thinned final coat
*a thinned final coat of gloss (could the flatteners be the issue?)
*a different application method
Something else.....