#6
I have a Ridgid thickness planer TP1300 which works very good for what I need it for.  The height adjustment is slipping as I feed in boards.  I've looked at it and cleaned it up, but still seems to slip.  Is there a part in there that is worn that needs replacement?  I also need to change the knives.  Maybe dull knives could be causing the problem.  Thanks in advance for your help.  PS, where is a place to get good knives?  I know in the past there have been suggestions post here, but I can't remember the details. 

Jim
Reply

#7
My Delta benchtop will slip out of adjustment when the knives are sufficiently dull.  The resistance from the dull blades overcomes the friction fit of the clamping mechanism on the lock bars and will force the cutterhead upward.
Reply
#8
It’s your dull knives.
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#9
(05-27-2019, 12:00 PM)NWOhioJim Wrote: I have a Ridgid thickness planer TP1300 which works very good for what I need it for.  The height adjustment is slipping as I feed in boards.  I've looked at it and cleaned it up, but still seems to slip.  Is there a part in there that is worn that needs replacement?  I also need to change the knives.  Maybe dull knives could be causing the problem.  Thanks in advance for your help.  PS, where is a place to get good knives?  I know in the past there have been suggestions post here, but I can't remember the details. 

Jim

Would recommend Holbren for the knives.
WoodTinker
Reply
Ridgid TP1300 height adj. slipping


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.