10-09-2019, 04:31 PM
The top on my saw has a crack in it. It is about 13/16" right of the throat plate opening. The crack is not al the way through and it is less noticalbe at the back than the front.
The saw itself is at least 20 yrs old, however, the top was replaced at least 10 yrs ago due to it warpping. The crack at the widest point is about 1/16" wide and deep and would trying to fill it with J.B. Weld keep the crack from espandinig?
Thank you for your help,
The saw itself is at least 20 yrs old, however, the top was replaced at least 10 yrs ago due to it warpping. The crack at the widest point is about 1/16" wide and deep and would trying to fill it with J.B. Weld keep the crack from espandinig?
Thank you for your help,
Herb
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.
I'm supposed to respect my elders, but it's getting harder and harder for me to find one now.