#7
  
Has anyone changed a tension wheel on a Grizzly Drum Sander? One of mine is hanging up. Seems I will need to remove the bearing. Wondering how to get the bearing off the drum.  thanks
Reply

#8
  Grizzly Drum Sander repair jeffss Has anyone changed a...
(01-13-2020, 07:11 PM)jeffss Wrote: Has anyone changed a tension wheel on a Grizzly Drum Sander? One of mine is hanging up. Seems I will need to remove the bearing. Wondering how to get the bearing off the drum.  thanks

Try Grizzly Techs. I have had good luck with them on two occasions.
Reply
#9
  Grizzly Drum Sander repair jeffss Has anyone changed a...
Try searching YouTube I your answer could be there.
Reply
#10
  Grizzly Drum Sander repair jeffss Has anyone changed a...
Isn't that a pillow block with bearing? You'll remove the block and slide the block and bearing off of the shaft to easily access the bearing.
"There are no strangers- only friends I haven't met.
Reply
#11
  Grizzly Drum Sander repair jeffss Has anyone changed a...
Thanks, Ended up on the grizzly site. Found the parts breakdown. Turns out they showed a set screw. Cleaned mine up and found it on the inside of the bearing. After that just a gear puller to ease it off the shaft.  New tension wheel was $17.00. Up and running.
Reply
Grizzly Drum Sander repair


Forum Jump:


Users browsing this thread: 1 Guest(s)