Posts: 4,439
Threads: 0
Joined: Jan 2005
(01-24-2020, 11:22 PM)CSCharney Wrote: Any suggestions for a business (Northeast) that could repair and sharpen a cracked Lenox Trimaster?
Thanks
Have you contacted Lenox? The only band saw blade repair I have heard of is Dover Band saw Repair. They are in Texas.
mike
Posts: 2,041
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Not sure if this helps but when I worked a Museum Exhibit shop, the folks in our metal shop that did welding could routinely make and repair bandsaw blades. We would buy coil stock and make our own lengths as we had several bandsaws taking different lengths. Maybe you can find a high end metalworking shop in your area and ask about repairing your blade.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 1,279
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
As far as repair is concerned, it is relatively easy to do that yourself with 45% or 55% silver solder and a propane torch. It also helps to make yourself a holding jig to keep it straight while doing this. There is at least one good video on YouTube about this.