#7
I up graded the stock guides on my Mini max S45 band saw from this. The lower guide system has plastic blocks.
 
[attachment=24969]

[attachment=24970]

To a Carted  ball bearing system. The upper guides worked perfectly but I didn't have a clue how the mount what they considered their bottom guide system.  And no instructions as to how to install what they sent me.
to make matters worse I only had this much room to work with.

[attachment=24973]

and after a couple trial and errors,

[attachment=24974]

 This is what I finally came up with.

[attachment=24975]

[attachment=24976]

[attachment=24977]

I did have to open the hole in the frame for the lower thrust bearing to move it  back a little with a cut off wheel on a dremel  tool and I had to use a right angled 4 1/2 disc grinder or a support rib on the table.

[attachment=24978]

Anyway what I know have preforms beautifully and I couldn't be happier with it. I have already started on building rip fence for it.

I hope you enjoyed  the read.

Tom


.
Reply

#8
Odd. My MM has the same guides upper and lower.
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply

#9
(03-17-2020, 04:06 PM)Stwood_ Wrote: Odd. My MM has the same guides upper and lower.

Is yours a S45? My first two pictures are the original guides from the saw.
Reply
#10
No, just MM16.......
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply

#11
(03-17-2020, 04:46 PM)Stwood_ Wrote: No, just MM16.......

While mine is a Minni Max, it is an S45 and not a 16. There is a big difference between the two, cost being one factor. The other noticeable factor is like having a pick up truck versus  a 10 ton dump truck. Both are trucks but they were mot created equal.
Reply
up grading saw guides


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.