Posts: 12,457
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
(05-20-2020, 09:35 AM)Jim Wrote: Thanks everyone! I should have put in my original question the reason I was asking for this info. I currently have a General 650 with a 52 inch fence. It sits on an HTC mobile base, which holds both the saw and the legs for the extension table. I would like to use the same mobile base if possible, to save from having to purchase the SS mobile base. I think my General is slightly heavier than the SS. The current mobile base moves with ease.
The Delta mobile base I had under my Unisaw was like that, the extension legs sat in the base. My saw is an ICS so this may be off alittle from a PCS, but the legs are 50 7/8" from the cabinet (52" fence). My cabinet is the width as the PCS..18 3/4", so it should be the correct length.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.