#5
  
These are some assorted chisels that I've accumulated over the years.

The one on the extreme left is a Czeck Edge chisel 5/16 wide. The one on the extreme right is also a Czeck Edge chisel, 3/16" wide. Both these have resin infused and dyed maple handles.

The second from the left is made from a Czeck Edge kit and has a olive wood handle and is 1/4" wide. The third from the left is also made from a Czeck Edge kit. 1/4" wide and also has Olive wood but is milled down to 1/8" thick in lieu of 1/4" as are the others.

Steel in these are 0-1. Overall length is 6". Thickness except as mentioned is 1/4".

I've used these a good bit but as of late they were stored in a drawer. 

I'm asking $22 each plus $7.00 shipping in the US. If someone would like all 4 you can have the lot for $80 plus $7.00 shipping.

Ron







"which plane should I use for this task?......the sharp one"

http://www.breseplane.blogspot.com/
Reply

#6
  Assorted chisels Ron Brese These are some assor...
(12-30-2020, 04:43 PM)Ron Brese Wrote: 1/4" wide olive chisel, 3rd from right in the pic has sold.
Ron
"which plane should I use for this task?......the sharp one"

http://www.breseplane.blogspot.com/
Reply
#7
  Assorted chisels Ron Brese These are some assor...
(12-30-2020, 04:43 PM)Ron Brese Wrote: 3/16" and 5/16" are SOLD.

1/4' with olive is still available, second from left in pic.

Ron
"which plane should I use for this task?......the sharp one"

http://www.breseplane.blogspot.com/
Reply
Assorted chisels


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.