Posts: 1,019
Threads: 0
Joined: Feb 2008
For those lengths, Oneida is a good choice.
Dust Hose
For up to 10' I get mine from Woodcraft. I use it with a 3 HP Oneida cyclone and no issues. Pretty stout stuff
"This is our chance, this our lives, this is our planet we're standing on. Use your choice, use your voice, you can save our tomorrows now." - eV
Posts: 12,463
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I've always used
these hoses from Woodworker's Supply, but I'm not sure I know what you mean by "pull back". These are fairly supple.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 16,163
Threads: 2
Joined: Oct 1999
I just went to
this system by Rockler. Upgraded my Penn State DC with a Wynn filter and installed the connectors for this hose on all my tools except the jointer and RAS, which are in stationary locations and connected directly to the 4" drops and have blast gates. So far I really like it and find it very convenient.
I have the 28' hose; just wanted to make sure it would reach everything else in the shop.
Doug
Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
I use hose from
Woodstock International. The best place I've found to find it is Grizzly. Good stuff, easy to work with and made here in the states...
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 1,664
Threads: 0
Joined: Apr 2005
I can't speak to 4" hose, I bought 10' 2 1/2" hose from Peachtree via Amazon. I find the stuff outstanding. I've always had the black hose that comes with shopvacs which is pretty stiff and can be difficult to work with. The stuff from Peachtree is
really flexible. How can something so flexible not collapse? I don't know but it doesn't. I put the screw-in ends on it and plugged one end into a Fein Turbo II vac, stretched it out then put one hand over the end. It sucked together to about 3' where the coils were tight to one another but the diameter remained at 2 1/2". I have the Fein hose which about 1 1/4". I think this Peachtree hose is at least as flexible, maybe more so. If the 4" is close, I'd recommend it. Plus it's made in the U.S.A.
https://www.ptreeusa.com/dust_hose.html
Posts: 69
Threads: 0
Joined: Nov 2016
In this same line..
I have some 4" dust collection hose that doesn't "accordion", it's more like a normal hose, taking out of the box, on the floor it measures 10 feet, doesn't really stretch, and doesn't contract, but bends enough to connect to tools.. but I can not remember where I got it
I'm looking for more of it.. anyone seen something like this? Maybe the Woodworkers supply hose from the link above? (hard to tell by descriptions)
(when I got it, the 10' section coiled in a box)
thanks in advance, Dave