#16
  
I've decided I should use PVC baseboards. I'm guessing they get applied with silicone. Is this the way to go?
Jim
Reply

#17
  PVC Baseboard Halfathumb I've decided I shoul...
Use fasteners
Mill and cut just like lumber
Reply
#18
  PVC Baseboard Halfathumb I've decided I shoul...
(03-15-2021, 04:12 PM)Halfathumb Wrote: I've decided I should use PVC baseboards. I'm guessing they get applied with silicone. Is this the way to go?

I used PVC in my bathroom right near my shower where there is some moisture.  I milled/routed, sanded and painted it like regular wood and used the same nails I used with the rest of the regular wood baseboard.
Reply
#19
  PVC Baseboard Halfathumb I've decided I shoul...
Any issues with shrinking/movement?
Neil Summers Home Inspections


When it comes to 'lectricity, I'm a pretty good wood turner.

... Grey Mountain 3/2/21

Reply

#20
  RE: PVC Baseboard Snipe Hunter Any issues with shri...
(03-15-2021, 05:21 PM)Snipe Hunter Wrote: Any issues with shrinking/movement?

None at all.  And this is in a bathroom that cycles between humid and dry.
Reply

#21
  RE: PVC Baseboard cams2705 [quote='Snipe Hunter...
(03-15-2021, 11:20 PM)cams2705 Wrote: None at all.  And this is in a bathroom that cycles between humid and dry.

Thank you...
Neil Summers Home Inspections


When it comes to 'lectricity, I'm a pretty good wood turner.

... Grey Mountain 3/2/21

Reply
#22
  PVC Baseboard Halfathumb I've decided I shoul...
(03-15-2021, 04:23 PM)cams2705 Wrote: I used PVC in my bathroom right near my shower where there is some moisture.  I milled/routed, sanded and painted it like regular wood and used the same nails I used with the rest of the regular wood baseboard.

Did the same around a shower. Worked beautifully and took paint (I did a light sanding). I used stainless finish screws to attach.
VH07V  
Reply

#23
  RE: PVC Baseboard EightFingers [quote='cams2705' pi...
(03-16-2021, 03:08 AM)EightFingers Wrote: Did the same around a shower. Worked beautifully and took paint (I did a light sanding). I used stainless finish screws to attach.

What did you use to plug up the screw heads?
Jim
Reply
#24
  PVC Baseboard Halfathumb I've decided I shoul...
PVC only expands due to temperature and not humidity, sothat shoudn't be a concern unless you have drastic swings (unlikely) in your house. 

As for plugging, acrylic or polyurethane caulk, or Cortex plugs work well.
Reply
#25
  PVC Baseboard Halfathumb I've decided I shoul...
I made plugs with a plug cutter from a scrap.
VH07V  
Reply
PVC Baseboard


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.