Posts: 4,974
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
I have a similar device attached to mine. You can find them at any of the big
box stores in the plumbing aisles. And they won't cost you anywhere near that.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 2,375
Threads: 0
Joined: Dec 2011
11-17-2021, 09:55 AM
(This post was last modified: 11-17-2021, 09:56 AM by Handplanesandmore.)
Almost all 3D printer-made fittings found on Etsy are costly because it is a slow making process. For $10 or so, you can find a plumbing solution to most dust adapters we need.
Simon
Posts: 12,446
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I think that was a spam post.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 4
Threads: 0
Joined: Nov 2021
01-06-2022, 11:57 PM
(This post was last modified: 01-07-2022, 08:34 AM by Stovedozer.)
Not a spam post at all just trying to share the best option I have found for the issue at hand. You wont find anything on your plumbing isle made for perfect discrepancies, cheaper and janky yes.
I do understand though that some guys prefer pretending to save money on the plumping isle. Mean while they use there money on parts, glue, fuel and most valuable there time. For something they probably still have a few rounds of duck tape on (which i have done!). I prefer something specifically made for the tool, so i can get to enjoying my hobby time.
Posts: 920
Threads: 0
Joined: Nov 1999
Location: Williston ND
If Stovedozer is some type of spammer you have to give hime kudos for monitoring his posts and responding to them.
I don't agree with his premise that using items from the the local plumbing isle is "dinking around" but do like hearing another opinion however jaded by a person's own interests.
Proud maker of large quantities of sawdust......oh, and the occasional project!
Posts: 295
Threads: 0
Joined: Aug 2008
Location: NW ga
Found this very helpful adapting hose fittings.
https://youtu.be/qS20exGNPbg
Posts: 4,974
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
(01-07-2022, 08:07 AM)Laid-Back Wrote: Found this very helpful adapting hose fittings.
https://youtu.be/qS20exGNPbg
Yup. Heat gun and a few minutes made several fittings for me.
Been using them so long now, I may have to spray paint them to
match!
Lol.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me