Posts: 12,622
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Personally, I would not put BLO on maple. I would use Arm-R-Seal for a hand applied finish or shellac and waterborne clearcoat or NC lacquer for a sprayed one. Arm-R-Seal looks great on both woods; it brings out the beauty of walnut and doesn't turn maple yellow.
As for the panels it's always a good idea to put at least one coat of finish on them before assembly. I think given what you said you wouldn't necessarily have to but it's good insurance.
John
Posts: 17,191
Threads: 0
Joined: Jul 2008
Location: Free At Last!
"Personally, I would not put BLO on maple. I would use Arm-R-Seal for a hand applied finish or shellac and waterborne clearcoat or NC lacquer for a sprayed one. Arm-R-Seal looks great on both woods; it brings out the beauty of walnut and doesn't turn maple yellow."
I think I'll try the Arm-R-Seal. It's a small enough project that hand-application is pretty easy. I'm assuming General Finishes is the only brand for it?
"As for the panels it's always a good idea to put at least one coat of finish on them before assembly. I think given what you said you wouldn't necessarily have to but it's good insurance."
The more I think about it, this is a good idea. I guess I thought it might not be necessary with an oil like BLO, but I might as well do it.
Posts: 887
Threads: 0
Joined: Apr 2006
Location: Trout Creek, Montana
11-20-2021, 12:08 AM
(This post was last modified: 11-20-2021, 12:00 PM by lift mechanic.)
I used to use a Watco wipe on poly. A couple of years ago John suggested the Arm-R-Seal and now it is the only finish I use. Very easy to apply and holds up well. I mainly work with Alder, Walnut and Hickory. When I make something with panels I do one coat before assembly. That way if the panel shifts in the frame it does not show. Don't be shocked after the first coat the finish will look terrible, at least that is my experience. After the second coat it will look much better. I lightly sand with 320 foam pad. The third coat it will look great. I have heard there are several ways to apply it. I use a foam brush. To keep the panels from rattling I use 1/4" rubber barrels or the balls and compress them with the panel during assembly. General Finish makes the Arm-R-Seal and not available in California, so you know it must be good.
Treat others as you want to be treated.
“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Posts: 20,836
Threads: 0
Joined: Oct 2003
I wouldn’t use BLO —especially inside.
I’m also an Arm-R-Seal fan. Beautiful and durable enough.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 580
Threads: 0
Joined: Sep 2005
Location: Bluffton SC
[attachment=38875 Wrote:lincmercguy pid='8032802' dateline='1637000234']I'm working on a hope chest that will be mainly walnut and maple. I plan on adding some unfinished aerobatic cedar parts inside as well.
For the finished parts, would boiled linseed oil or hand-wiped polyurethane be better? Also, should I finish the panels of the frame and panel sections before assembly like a cabinet door? It will be going to Eastern Nebraska from the Colorado High Plains, so I'm expecting a bit of panel expansion.
I use (General) Satin
Arm-R-Seal now on all of my projects. I wipe in on with a soft cloth. It could not be easier. Here's a pic of my last 2 projects.
Posts: 17,191
Threads: 0
Joined: Jul 2008
Location: Free At Last!
Is that cherry in that table? Looks very nice. Did you stain it first?
Posts: 17,191
Threads: 0
Joined: Jul 2008
Location: Free At Last!
"Why stain cherry?"
To make it darker.
I've been messing with cherry a bit since I eventually want to build kitchen cabinets for the house with it. I've done several test pieces with letting them age in the sun a bit, finishing them, and letting them sit out to darken. They've not darkened enough for my taste in 12-14 months. I know they need to go a little more yet.