02-02-2022, 05:08 PM
Starting to plan my dust collection layout. I was looking at using Nordfab pipe and fittings. The consensus seems to be, great stuff but expensive. I looked on the Grizzly site and they have US Duct. The US Duct is considerably cheaper. Like 40% on a 8" by 5' pipe section!! Does anyone have any experience with either brand? Are they basically interchangeable? I know that my new DC is set up for Nordfab.
I like the fact that the metal duct can be changed easily but I was wondering if once I branch off the main truck if the installation would be easier using PVC? The main trunk will 8". I will probably have 1-3 8" lines coming off the main. Once I drop down to 4" for each machine, is it easier to use PVC?
Any other issues that I need to consider?
TIA
Toney
I like the fact that the metal duct can be changed easily but I was wondering if once I branch off the main truck if the installation would be easier using PVC? The main trunk will 8". I will probably have 1-3 8" lines coming off the main. Once I drop down to 4" for each machine, is it easier to use PVC?
Any other issues that I need to consider?
TIA
Toney