Posts: 14,813
Threads: 10
Joined: Jan 2010
Location: southeastern VA
07-06-2022, 04:46 PM
(This post was last modified: 07-06-2022, 04:48 PM by iclark.)
IIRC, there were some posts a couple years ago where people had some issues with the blade sharpened on hook-and-loop not being as crisp as on the PSA.
If your touch is light enough, I expect that things would be better on the wide-blade attachment (disc spinning roughly perpendicular to the blade edge) vs feeding a chisel in from below (where the flex/dent in the sharpening surface would be more on one side of the chisel than the other).
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 4,751
Threads: 0
Joined: Aug 2006
(07-05-2022, 06:38 PM)museumguy Wrote: Quick question. I have access to some 1000 and 2000 hook and loop discs. How do you think it'll work on a Worksharp 3000 with a psa to hook and loop conversion disc? I may be overthinking the "flex" (if any) in hook and loop.
I think bad idea if you want to grind a flat edge.
I long for the days when Coke was a soft drink, and Black and Decker was a quality tool.
Happiness is a snipe free planer
Posts: 1,288
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
A few years back, I abandoned the use of paper on glass for that reason. I found that the paper would very slightly curl under the pressure of the blade and I would end up with a slightly rounded edge; not as sharp as it should be. After switching to water stones and diamond stones, my bevels are flat and edges very sharp. I think you will have the same issue only worse.
Posts: 23,199
Threads: 0
Joined: Jan 2003
There is a set of CBN disks for sale in S&S which are tempting me.
It is difficult to free fools from the chains they revere. - Voltaire
Know what, Bob? You win. CharlieD, 4/21/2008
I salute you. Hail MGoBlue! Hail MGoBlue! Hail MGoBlue!!!! CRR, 2/19/2008
Posts: 2,075
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
(08-16-2022, 05:22 PM)MGoBlue1984 Wrote: There is a set of CBN disks for sale in S&S which are tempting me.
I saw those. Very tempting.
I appreciate all of the responses. They have reaffirmed my suspicions. I'm gonna pass on h&l paper.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 23,199
Threads: 0
Joined: Jan 2003
Timberwolf you have an Amazon link to the diamond plates?
It is difficult to free fools from the chains they revere. - Voltaire
Know what, Bob? You win. CharlieD, 4/21/2008
I salute you. Hail MGoBlue! Hail MGoBlue! Hail MGoBlue!!!! CRR, 2/19/2008