#10
Wink 
There is a maker of premium hand saws in my community that needs a woodworker to make some of the wooden parts for their saws. I'm going to refrain from naming the brand since I'm just doing a trial run, but I'm sure some of you will have a good guess. 

They don't actually need me to make the saw handles, but one of the items is a kerfing plane that goes with a frame saw. They need both the plane body and the parts for the frame saw. Most of the work is pretty straightforward, but the one part I'm looking for some help with is consistently cutting the kerf into the plane body for the blade. I imagine fitting an unset blade between a couple of pieces of plywood and having it to always get the same exact results. 

I feel like there are some folks that regularly make saw handles who need to get that kerf just right. I'm looking to take a page out of your book for this task.
How do you know you're learning anything if you don't screw up once in awhile?

My blog: http://birdsandboards.blogspot.com/
Reply

#11
Hi Josh,

I use a circular saw in the drillpress. Only pictures I've published on my Instgram: https://www.instagram.com/p/CWfyv_0ISHL/

Cheers
Pedder
Reply

#12
(11-12-2022, 05:21 AM)Pedder Wrote: Hi Josh,

I use a circular saw in the drillpress. Only pictures I've published on my Instgram: https://www.instagram.com/p/CWfyv_0ISHL/

Cheers
Pedder

Your setup is clever as hell. Could you share a bit about how it's all put together? It looks like a built-up unit that just chucks into the drill.
How do you know you're learning anything if you don't screw up once in awhile?

My blog: http://birdsandboards.blogspot.com/
Reply

#13
(11-12-2022, 10:05 AM)mr_skittle Wrote: Your setup is clever as hell. Could you share a bit about how it's all put together? It looks like a built-up unit that just chucks into the drill.

"Slitting saw" is a good search term.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Reply
#14
(11-12-2022, 05:21 AM)Pedder Wrote: Hi Josh,

I use a circular saw in the drillpress. Only pictures I've published on my Instgram: https://www.instagram.com/p/CWfyv_0ISHL/

Cheers
Pedder

Two thumbs up! Genius.
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply

#15
(11-13-2022, 11:17 AM)Gary G™ Wrote: Two thumbs up! Genius.
Took me a few saws to concoct a similar method, I used the Simpleton method for at least a half dozen saws. I just use the same thickness plate with no set and just take it slow and hand cut it like a gent's saw. It's not genius, but it works!
Winkgrin

After I got my first mill I used a slitting saw as Pedder showed. It's a lot quicker to cut them by hand as I describe as the Simpleton method!
Cool
Alan
Geometry was the most critical/useful mathematics class I had, and it didn't even teach me mathematics.
Reply
#16
I really don't klnow what to tell more? Ist is a circular saw blade in a holder. You kan buy different holder here in Germany, but I don't have a clue where in the US you can buy these. May be you tell more about your machines and the needs of the task?

Cheers
Pedder
Reply
#17
Try Amazon: hss circular saw blade cutting disc wheel set.

Simon
Reply
kerfing jig


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.