Posts: 10,710
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
You may want to contact Thompson Lathe Tools directly. His tools are typically sold without handles, but I suspect he would entertain providing you with an unground version.
Still Learning,
Allan Hill
Posts: 929
Threads: 1
Joined: Sep 2008
I use worn-out Jointer and Planer knives.
Captain Kirk was talking about my shop when he said: Space the final frontier!
Posts: 14,805
Threads: 10
Joined: Jan 2010
Location: southeastern VA
Reaching out to Doug Thompson wouldn't hurt, but that is a bit thin for what he produces.
Our local Woodcraft used to stock ~1/4" square tool steel that they used in the Turning 101 classes. They sold it in the store (usually) but did/do not list it on their website. Calling your local WD might give you a local lead. If they have classes in knife making or hand plane making, then you could probably get a good lead from them.
If you have a local metal-supply company, I would give them a call to see what varieties of steel they have in stock in the size that you are looking for. You might find that you have a selection of various HSS's and you would need to do some research about which alloy you want.
RoboHippy used to have good sources for material to laminate his ugly sticks, but he does not seem to come here very often anymore.
There is a reasonable chance that some place like Grainger would stock various tool steels, but they tend to be pricey for what you get.
If you have not already done so, posting your request in hand tools would probably get more responses for wide, thin tool steel sources.
Other than getting stock to build up one of RH's ugly sticks, I am having trouble visualizing what you might want to make. The only thing coming to mind id a wide chatter tool.
When you feel like it, I would be very curious about what you are making.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 4,443
Threads: 0
Joined: Jan 2005
(06-16-2024, 08:33 PM)thinshavings Wrote: Where can I buy HSS tool blanks that I can grind custom profiles?
I bought some from Woodcraft probably close to 30 years ago, I didn't see any on their website now.
Looking for 1 to 1.25 inch in width and 1/8 thick.
There are many metal supply houses that carry exactly what you want. McMaster Carr is one of many. Do a search for HSS tool blanks.
HSS blanks come in many widths and thicknesses and also in round stock.
mike
Posts: 835
Threads: 0
Joined: Jun 2007
I repurposed all my old harbor freight lathe tools. They are not expensive and already have a handle. Bought a second set and have only redone two out of that set. I have to watch the heat when I redo them. Although it's not like I use them everyday they hold some edge to do what I'm after.
Posts: 1,698
Threads: 13
Joined: Jul 2001
You can buy HSS blanks all day long from Amazon.
The cheap Chinese ones give you no indication of metallurgy beyond that except most claim to be hardened to ~Rc60
Probably a cheap grade of M2 is my guess. By cheap I mean: expect mediocre composition and heat-treating. Still good for casual use tho.
-Mark
If I had a signature, this wouldn't be it.