Posts: 2,726
Threads: 0
Joined: Dec 2005
(09-27-2020, 09:21 AM)adamcherubini Wrote: I appreciate Phillip for sharing his project with us on the Hand Tools forum. I think he raised a subject (edge work) that benefits the entire community, which, in my mind, is the very best use of forums like this one.
Adam: I appreciate your insight into this topic and want to thank you for sharing your knowledge in my humble post
Phil
Posts: 2,726
Threads: 0
Joined: Dec 2005
Finish on carcass completed. Doors installed. Still working on the top.
Posts: 2,387
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
That is some nice looking work you got going on there!!!!!!!!!!
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 415
Threads: 0
Joined: Feb 2008
Wow, that sure is nice work, Phil! The doors especially came out great. I think you said earlier what you were using for a finish, but can’t remember...Osmo?
Can’t wait to see the drawers in and top on...and maybe see it in person at some point!
Kevin
Posts: 2,726
Threads: 0
Joined: Dec 2005
Bill: appreciate the kind words!
Kevin: Thanks much! Yes the finish is Osmo Polyx Oil Clear Gloss. It really does not have much of a gloss, more like a satin. Yes you are cordially invited to see the finished product: wont predict when, hopefully sooner rather than later.
![[Image: OS-PXG_B_big.jpg]](https://toolsforworkingwood.com/prodimg/os/big/OS-PXG_B_big.jpg)
Posts: 925
Threads: 0
Joined: Jan 2013
Location: Columbia, SC
That looks really nice, Philip. Did you get the top bevel figured out?
Posts: 2,726
Threads: 0
Joined: Dec 2005
(09-29-2020, 11:27 AM)Hank Knight Wrote: That looks really nice, Philip. Did you get the top bevel figured out?
Hank: Thanks! Just finished curved bevel on front and back. Tomorrow I tackle the 10º bevels on the ends. Stay tuned! Phil
Posts: 10,011
Threads: 1
Joined: Apr 2005
Location: Texas
Looking great! Looks like the finish is making the cherry pop.
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
AD1 T. O. Cronkhite
Posts: 2,726
Threads: 0
Joined: Dec 2005
09-30-2020, 11:06 AM
(This post was last modified: 09-30-2020, 11:14 AM by Philip1231.)
Planing the bevel on the ends of the top (make sure your volume is on Maximum):
Planing Top Bevel
Posts: 925
Threads: 0
Joined: Jan 2013
Location: Columbia, SC
Perfect! Can't beat a hand plane for some jobs.
