Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
2x6 walls and r38 attic would be ideal. Wouldn't cost that much more.
If you like to have videos going or your favorite woodworking show- get a older flat screen 40-42" TV. I have one and it puts out about 600 watts and heats my shop while I watch/listen to "Tool Time". LOL.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
I'm assuming it's a metal building or similar so nothing to attach anything to on the walls. So I'd 2x4 frame the walls then spray foam it. Then you can plywood or drywall.
Then I would insulate the doors. I insulated mine with left over metal building fiberglass insulation. Just cut to fit and tape it in place. You can screw on aluminum to the inside if you want.
As for the floor... My shop floor gets very hot in the summer but after a layer of the foam tiles from costco it stays much cooler. Would love a heated and cooled floor...
Posts: 4,654
Threads: 0
Joined: Jan 2008
no help here, but glad to see someone had their priorities straight and is looking at a woodshop with house attached and not house with woodshop attached!
Posts: 38,525
Threads: 0
Joined: Feb 2002
Location: East Texas
I almost had my wife convinced to buy a house on a bit of land that had a 4000 sq ft shop on it....were even in contract for it....but then another house came on the market that she liked even more (and it was a better deal, sans a shop) that we ended up buying instead.
Reality is that which, when you stop believing in it, doesn't go away. - Philip K. Dick
Mark
Posts: 2,840
Threads: 0
Joined: Nov 2006
Location: Western NY
(11-18-2016, 06:57 AM)fredhargis Wrote: Using electric heat there would take Bill Gates money, I suspect. I like Mark's idea...call an insulating firm and ask them.
Actually we have some of the cheapest electric available. ~ $0.067 per kWh. Drive a short distance and it doubles in price. We make up for it in taxes though. There is natural gas to the house, and I could extend it to the garage. I have read the gas puts moisture into the air as a byproduct of burning. Assuming what I read was true, and since the price is about the same, I would prefer electric. My previous house had a forced air electric furnace.
I tried not believing. That did not work, so now I just believe
Posts: 2,840
Threads: 0
Joined: Nov 2006
Location: Western NY
(11-18-2016, 12:06 PM)Robert Adams Wrote: I'm assuming it's a metal building or similar so nothing to attach anything to on the walls. So I'd 2x4 frame the walls then spray foam it. Then you can plywood or drywall.
Then I would insulate the doors. I insulated mine with left over metal building fiberglass insulation. Just cut to fit and tape it in place. You can screw on aluminum to the inside if you want.
As for the floor... My shop floor gets very hot in the summer but after a layer of the foam tiles from costco it stays much cooler. Would love a heated and cooled floor...
It has plywood sheeting (not OSB) on the outside walls, with vinyl siding. It is 4x4 post, 2/4 horizontally, to which the sheeting attaches. If I run 2x4 on the inside, I will have 6" walls.
I tried not believing. That did not work, so now I just believe
Posts: 1,630
Threads: 0
Joined: Oct 2016
Location: Green & Gold and Red & White country
11-18-2016, 06:15 PM
(This post was last modified: 11-18-2016, 06:16 PM by MikeBob.)
(11-18-2016, 06:00 PM)Cecil Wrote: Actually we have some of the cheapest electric available. ~ $0.067 per kWh. Drive a short distance and it doubles in price. We make up for it in taxes though. There is natural gas to the house, and I could extend it to the garage. I have read the gas puts moisture into the air as a byproduct of burning. Assuming what I read was true, and since the price is about the same, I would prefer electric. My previous house had a forced air electric furnace.
Yes you at correct about the moisture IF it is a non vented type of heater, oil or gas, you get 1 gallon of H2O per 100,000BTUs in your shop. If it is vented heater the moisture goes out the chimney.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. RMB
The SO asked me today, "what are you going to do to day"? I said "nothing". She said, "that's what you did yesterday"! Me, "Yes love, but I was not finished yet"!!!!!!!!
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
The furnace just heats the air, it doesn't add or remove moisture unless it gets it's combustion air from the home or is non-vented.
The change in humidity comes from temperature change in relation to the outdoor air entering the home.
Leaky doors and windows let outdoor air in the home. If it is wet outside, the moisture level goes up- if it is dry outside, it goes down.
Humidity is relative to moisture in the air at a given temperature.
If the house gets dry- try boiling some homemade chicken soup on the stove- take long showers or hot baths. Reduce outdoor ventilation/infiltration. Hope for rain.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
(11-18-2016, 05:27 PM)tomsteve Wrote: no help here, but glad to see someone had their priorities straight and is looking at a woodshop with house attached and not house with woodshop attached!
The deal with LOML was when we bought a house it either had shop or had room for a shop. So I have a nice insulated metal building for my shop.
Now that we are looking for places in SC between Spartanburg and Charlotte it's proving to be allot harder as the property sizes are much smaller there and few houses have shops or outbuildings.
Posts: 1,172
Threads: 0
Joined: Dec 2007
Let me put in a vote for Mini-split heat pump/AC. The new ones remain relatively efficient (in heat pump mode) to much lower temperatures than they used to. Get Air Conditioning with the deal (hobby now 4 seasons). Don't take up any floor space, no service except blowing out the filter a few times a year. I chose to skip electric resistance heating coils (less expensive up front, and when it is really cold (under 20F) I chose to stay inside. I'm located in southern Indiana, and shut it down 2-3 weeks a year. Have not seen a noticeable difference in electric bill, but I'm sure that could be calculated.
Will cost a bit more up front, less applicable in intensely cold northern area, don't heat as quickly, so make less sense for those who don't want to heat regularly. I keep it at 68 in the winter and 76 in the summer. and forget about it until the season changes and I toggle to the other mode and blow the dust out.
Ray
|
