Posts: 5,283
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Yup. Ours was acting up too.
Pulled the interior screen and there was a quarter
and a dime in it. Intermittant blockage as they
swirled around.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 2,097
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Could be the same issue I had. Washer would not drain. Did online search and found this video.
https://www.youtube.com/watch?v=zLGvhxoyWMY
This is what was wrong with my machine. I don't know if yours is anywhere close to the same model. I posted this on another website and several people did the cleaning suggested and found several clogs. Also, check around the door gasket, I found several of my grand daughters socks.
Good luck.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 36,782
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I should have known this wasn't a misplaced thread about Fedora 21. I need a beer, and apparently I need to spend less time working.
Posts: 1,422
Threads: 0
Joined: Dec 2004
The motor and impeller from the Sears Parts site was back ordered for three weeks. I figured they were wanting to sell the whole strainer/pump module for much more money. I ended up finding the whole module on Amazon for the same price I was just getting the motor at Sears. It all went back together fairly easily and I pumped about 4 loads of laundry through it on Saturday. Seems to be working again. Not really sure how the impeller shaft had gotten bent.
Posts: 2,097
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Good. Glad it worked for ya.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
