Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
(12-16-2017, 04:37 PM)Stwood_ Wrote: I can't afford that amount of garden hose.
When I drain ours, I remove the drain valve and scrap the sediment out. I made a scraper from a 1/8x1/2 piece of flat iron. The end is spoon shaped.
I used to use something just like that too to get around the corners so the vacuum could pick it up.
Posts: 822
Threads: 0
Joined: Apr 2003
12-17-2017, 05:36 AM
(This post was last modified: 12-17-2017, 05:38 AM by frule.)
(12-16-2017, 09:10 AM)johndi Wrote: So we just had a new water heater installed with our new furnace ( 50 gallon BW natural gas) and I thought I remembered that it was recommended to turn off and drain the tank once a year?
Does anyone do this and is there any benefit?
Thanks
I drain mine yearly and check the anode tube (probably the one most important thing to do to lengthen a WH life).
Here is a great site for all things about water heaters:
http://waterheatertimer.org/Clean-sedime...shelectric
Posts: 507
Threads: 0
Joined: Jul 2013
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
about how long does it take to drain? My estimates are off because I have never done it until the thing was fully crusted over, so the valve was really slow. Last time I did it, the stuff was enclosing the lower heating element. Oops, new water heater time
Posts: 887
Threads: 0
Joined: Sep 2009
Location: Carlisle, PA
(12-20-2017, 01:06 PM)EricU Wrote: about how long does it take to drain? My estimates are off because I have never done it until the thing was fully crusted over, so the valve was really slow. Last time I did it, the stuff was enclosing the lower heating element. Oops, new water heater time
My daughter can drain a 50-gallon hot water heater in about 5 minutes or less!
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
the problem with that method is that it refills the water heater at the same time. I need mine pretty empty because I'm replacing the leak pan and moving it a couple of inches
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I drain mine fully. No sloshing around. I then remove the drain valve from the tank, so I can get my homemade scrapper in there and scrap all the residue out of the tank.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 22,222
Threads: 0
Joined: Nov 2002
(12-16-2017, 09:10 AM)johndi Wrote: So we just had a new water heater installed with our new furnace ( 50 gallon BW natural gas) and I thought I remembered that it was recommended to turn off and drain the tank once a year?
Does anyone do this and is there any benefit?
Thanks
I just replaced an A.O. Smith 40-gal gas water heater after it lasted 30 years. I drained it once during the 30-year period. I suppose I could have kept it another 10 years. It was still working fine, but everybody said, "Your water heater is 30 years old?"
Rip to width. Plane to thickness. Cut to length. Join.
Posts: 31,110
Threads: 2
Joined: Mar 2003
Location: Athens, TN
Why drain when you can leave it under pressure and purge? Just wondering why?
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Ours doesn't *purge* out. Buildup sticks to the tank.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020