hide/not hide plumbing
#14
(01-11-2018, 03:25 PM)daddo Wrote: They could use a little imagination like having a squirrel underneath holding a bucket or something.  
Winkgrin


Laugh
Laugh
Laugh
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#15
Also the glass shelf brackets mounted to the wall. Looks real fun getting that installed.
Reply
#16
(01-16-2018, 06:29 PM)Phil Thien Wrote: Also the glass shelf brackets mounted to the wall. Looks real fun getting that installed.

I've used that hardware and it works remarkably well.  

You mount two screws into the wall and then a small screw at the bottom clamps onto the shelf.  These shelves are mounted on the vanity and supported outboard with the brackets.  It should be strong enough.

The piece at the left is the top and it gets screwed into the wall.  The piece on the right is the bottom and it gets screwed into the top piece.  Your screwdriver is going to be very close to the wall for this, but mine worked fine.

[Image: HSB304-2-P2%20(8).jpg]
No animals were injured or killed in the production of this post.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.