Posts: 454
Threads: 0
Joined: Apr 2007
Partly it’s because off the built in remote but from what I’ve read I believe it also similar to a magnetic switch. So if the power goes out it won’t automatically turn back when when the power returns.
Posts: 6,123
Threads: 0
Joined: Jan 2006
Location: Central Kentucky
(06-28-2021, 09:40 PM)Cabinet Monkey Wrote: This is totally dependent on where you live.
No motor shop in the ATL will even look at a motor for $40, let alone repair one.
Just curious, have you actually called around and checked?
I didn't know how cheap it would be to repair a motor compared to buying a new motor until I called and subsequently dropped the motor off for repair. It was probably closer to $60, but a lot less than a new one.
Posts: 776
Threads: 0
Joined: Jan 2007
Location: ATL
(06-29-2021, 07:42 PM)Scoony Wrote: Just curious, have you actually called around and checked?
I didn't know how cheap it would be to repair a motor compared to buying a new motor until I called and subsequently dropped the motor off for repair. It was probably closer to $60, but a lot less than a new one.
No, I actually took the motor to a couple of shops, so they could see exactly what they’d be dealing with.
Big waste of time.
So , like I said , it’s dependent on where one lives. Bottom line is be flexible.
Posts: 917
Threads: 0
Joined: Sep 2008
Around here repair places charge about $100 per hour and a minimum charge of $50 just to look at whatever. Depending on thecost of the motor it might or might not be worth it Several years ago I had to replace a 5 horse 220 motor on a shaper. New motor was around $600 at that time. Now that I think about it, tthat was about 12 years ago. No idea what one would cost now.
