11-21-2024, 11:59 PM
(11-21-2024, 11:29 PM)abernat Wrote: I did make an outfeed table with the removable pins and decided to overengineer by going with a torsion box. The top skin is 1/2" ply, the bottom is 1/8" hardboard, and the ribs are 1/4" ply. I definitely wouldn't want to try to remove 1 1/2" of MDF - that's going to be hella heavy.
It also must have taken 5x as long to make
Yours sounds like a good one. As was mentioned above, I didn't make the top.
Doug