Posts: 3,181
Threads: 0
Joined: Nov 2009
No argument here regarding the importance of timely doses of caffeine.....but isn't that coffee cup sitting on the BENCH? Once again, the bench plays a critical role!
titanxt said:
BaileyNo5,
I will respectfully have to disagree... The most important tool in the shop would have to be the coffee cup - without it you would not be able to hold the coffee....
True power makes no noise - Albert Schweitzer. It's obvious he was referring to hand tools
Posts: 4,169
Threads: 0
Joined: Sep 2004
Location: Indiana
Very well spotted!!!
Andy
I am quickly realizing that I have NO natural talent... But I am trying to fake it.
Posts: 789
Threads: 0
Joined: Aug 2007
Posts: 13,842
Threads: 0
Joined: Jun 2001
Posts: 1,474
Threads: 0
Joined: Mar 2011
I modify tools as needed to get a job done but here are a few I made.
Adjustable marking gauge for planking.
A little bronze hammer.
At the risk of outing myself here is a router plane.
A small bench to work on inside a boat.
A couple of knives.
A handheld drill chuck.
A sine bar for setting precsion angles in the table saw.
And a workbench.
I'm sure there are others but no photos yet. Many tools re-handled.
Jim
Posts: 1,667
Threads: 0
Joined: Jun 2008
Boatman53 said:
At the risk of outing myself here is a router plane.
Jim
Yup, you did it, although i was pretty sure you were the Secret Santa. The wood, craftsmanship and the return address had me convinced.
And the plane is beautiful! It is so nice I don't want to take out from under the tree. Thanks again!
Often in Error, Never in Doubt
Mike Jury
Posts: 4,372
Threads: 0
Joined: Sep 2005
Many thanks to all who have posted pics of your inspiring craftsmanship. Much appreciated!!
Quote:
A small bench to work on inside a boat.
Jim, what are the dimensions of that bench, please? TIA.
"For true creativity, we have to think beyond our tools." - MsNomer -
"Measuring is the enemy of precision." - Chris Schwarz on story sticks -
"only one opinion counts, the one that pays." - daveferg -
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
I made these for my SS recipient this year. They are cocobolo handled screwdrivers, using the Lee Valley lifetime screwdriver shafts. The ferrules are 1/2" brass plumbing couplers.
Still Learning,
Allan Hill
Posts: 1,730
Threads: 0
Joined: Jan 2010
Awesome thread!!! Thanks for thinking of this.
Even seen the spokeshave I received last year from my SS.
Sticks head in.......Looks around..........Sniff, Sniff.....It's good to be home . McApple 7/29/10
Metal chairs have no soul. patriarch 12/07/2013
Posts: 7,011
Threads: 0
Joined: Aug 2004
Location: Perth, Australia
Here are a few more ...
Joinery saw (11") and Carcase saw (14"), both crosscut:
Jarrah brace and driver in presentation box (with drawer for bits) ...
A mallet for mortice chisels ...
Chip carving knives (made as a gift) in a presentation box ..
Many, many marking knives and scratch awls ..
More later.
Regards from Perth
Derek
