GOOD DEED 2008: The beginningwoodworker/Unisaw Project

[Bones™]

The handle that sticks off the crank wheel.

Somebody tell me where all this LVC stuff is, and I'll take it off.

All he needs is a good ole mag switch.

[Bones™]

Yes, I forgot that he would need a blade to cut something

[Lumber Yard®]

skizzo said:

---

[blockquote]Bones™ said:

---

Needs new switch.
Needs grip on one handle (I think).

---

What is the handle for/attached to?

Regarding the switch, I saw the other post about the LVC/mag starters in the other thread. We need to know more about what switch is actually needed -- is it just the remote starter for the LVC, or an integrated unit to replace the LVC? This would be an integrated mag switch from Grizzly. If wanted, I'll buy a switch like that for him and pay shipping to have the LVC assembly that's installed on the machine sent to me.



Bill.

---

[/blockquote]

I have this switch:



S&S link

If Skizzo wants I'll sell him mine for $60 shipped to Bones or BWW to get him set-up. I think that'll be cheaper than even Grizzlies. If not no biggie. I consider the switch to be worth 2x the price so that would be my contribution to the cause. If that isn't agreeable than I'll get in for something else.

[Bones™]

Good deal.

If Skizz agrees, we can send it to CJ, so he can know what and how his saw is put together.

Then we can get the LVC to Skizz

[Bones™]

Update:

The anonymous benefactor has volunteered a brand new Woodworker II blade for the cause

[Bones™]

We now have a Freud blade on the way, also.

[Blacky's Boy]

Lumber Yard said:

---

[blockquote]skizzo said:

---

[blockquote]Bones™ said:

---

Needs new switch.
Needs grip on one handle (I think).

---

What is the handle for/attached to?

Regarding the switch, I saw the other post about the LVC/mag starters in the other thread. We need to know more about what switch is actually needed -- is it just the remote starter for the LVC, or an integrated unit to replace the LVC? This would be an integrated mag switch from Grizzly. If wanted, I'll buy a switch like that for him and pay shipping to have the LVC assembly that's installed on the machine sent to me.



Bill.

---

[/blockquote]

I have this switch:



S&S link

If Skizzo wants I'll sell him mine for $60 shipped to Bones or BWW to get him set-up. I think that'll be cheaper than even Grizzlies. If not no biggie. I consider the switch to be worth 2x the price so that would be my contribution to the cause. If that isn't agreeable than I'll get in for something else.

---

[/blockquote]

That's the exact Grizzly switch I used when I restored my Unisaw. It's worked perfectly for the past 8 years.

[Bones™]

Send us your fence rails

[skizzo]

Bones™ said:

---

Good deal.

If Skizz agrees, we can send it to CJ, so he can know what and how his saw is put together.

Then we can get the LVC to Skizz

---

Deal. Lumber Yard, PM me your address and I'll send out a check. You guys decide whether to send the switch to Bones or BWW. Bones, the LVC is that box enclosure hung on the back of the cabinet on each of the saws in this photo:



Hopefully, it's connected to a small controller box with start/stop buttons somewhere on the front of the saw, but that may be missing, which would have led you to say that it needs a new switch. No problem if it's not there, the LVC box on the back by itself is fine. After removing the LVC box from the cabinet, don't worry about unwiring it. It looks like the cords with wall plugs are intact with the boxes, and inside the machine you can just cut the cords as needed.

Thanks. Bill.

[lobster]

Bones,

A grand gesture on your part and all those who have pledged help already.

I don't have any Unisaw parts nor do I have anything of significance in my PayPal acct. However, are there other areas of need to which some of us may help? I was thinking of other tools and items which may be in need that we could scrounge around for? router bits? chisels? saw baldes? clamps? etc...

If there is a list of sort, I'd be happy to scrounge my stash to see if I could send a few items...

Please PM me or post a list if you think it would help.

I'm just trying to help a guy in need.