Posts: 120
Threads: 5
Joined: Apr 2007
"That's like getting a running start and diving headfirst into the vortex."
Steve Freidman 4/21/2013
Posts: 2,007
Threads: 0
Joined: Apr 2008
wow. glad you're not hurt, and KUDOS to you for standing off to the side! Had you not been doing that, i'm sure someone else would be working on flesh instead of you working on glass.
Posts: 16,471
Threads: 0
Joined: Mar 2005
And you were being careful. Proves that none of us are safe.
Very happy that neither you or the dog were injured.
See ya later,
Bill
Posts: 694
Threads: 0
Joined: Jan 2007
You are very lucky that the only damage is to the shop.
From your photo, it appears you have the blade tilted to toward the fence, if that is true
, that is the cause of the kickback.
That would be trapping the board between the fence and the blade, and if the board rises at all you have kickback.
Posts: 11,666
Threads: 0
Joined: Dec 2006
Yeah, I didn't notice that at first glance but a trapped bevel cut is probably the cause. (hard to be certain from the pic) If indeed it was a bevel cut the fence needed to be moved to the left of the blade on your RT saw. HTH
Posts: 125
Threads: 0
Joined: Apr 2005
Please describe exactly what happened so we can all benefit. Was it that you were relying ONLY on the grip tites to hold the piece both against the table and fence?
What do you think were the main causes of this incident?
Posts: 120
Threads: 5
Joined: Apr 2007
Yeah, I think that's what happened. Usually that isn't a problem, but, it looks like I'll be using the fence on the left side of the blade for those bevel cuts.
"That's like getting a running start and diving headfirst into the vortex."
Steve Freidman 4/21/2013
Posts: 120
Threads: 5
Joined: Apr 2007
Yes, I was using the Grip-tites and a push stick.
"That's like getting a running start and diving headfirst into the vortex."
Steve Freidman 4/21/2013
Posts: 1,344
Threads: 0
Joined: Oct 2003
Makes me want to take up reading
Glad you alright - that could have been brutal
Posts: 4,812
Threads: 0
Joined: Apr 2005
Location: Macomb, OK
HandyDandy said:
You are very lucky that the only damage is to the shop.
From your photo, it appears you have the blade tilted to toward the fence, if that is true , that is the cause of the kickback.
That would be trapping the board between the fence and the blade, and if the board rises at all you have kickback.
Norm does this all the time.
(just sayin. I think it's unsafe also.)
brian
The board, as you can see, has a nice 22* bevel arch cut through it. I expected to be working with wood today, but it looks like glass will be the material of choise. Scarred the h*** out of the dog outside.
