Posts: 11,420
Threads: 0
Joined: Dec 2002
Over the years I've used a variety of cleat design to attach a wooden top to a wooden base for tables. Some have stood the test, others not. In the 'not' category, I've had some where the cleat broke, others where the apron broke!
I'm now making a table larger than any I've made in the past. The base will be heavy, and I need a substantial attachement system that will take a few generations of people lifting and moving the table by grabbing the top overhang.
What do you suggest?
MAKE: Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out...
www.makezine.com
No Good Deed Goes Unpunished
Posts: 66,159
Threads: 1
Joined: Mar 2007
Location: Massachusetts
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Just because they are faster. Just oversize forstner bit, and screw, get em all set, flip and center top, screw again
If I remembered to cut that darn dado, the kind Barn showed work as well, but if you forget the groove until you are ready to assemble it just isn't convenient to make it after you have glued up the frame.
Worst thing they can do is cook ya and eat ya
GW
Posts: 712
Threads: 0
Joined: Feb 2013
I use the kind Barn showed.
I never cut the groove till it's all finished.
I use a bisquits jointer that's always set to the perfect depth.
Actually the only thing I still do with it.
Rusty
Poppa's Woodworks
Posts: 11,420
Threads: 0
Joined: Dec 2002
Thank you gents!
MAKE: Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out...
www.makezine.com
No Good Deed Goes Unpunished
Posts: 3,873
Threads: 0
Joined: Jan 2006
When I have a solid wood top I fasten it to the center of the apron with screws and glue for about 3" of width(2 screws each end) This gives it a solid feel and expansion is not a problem. Use various methods to fasten to the long aprons.
Posts: 3,873
Threads: 0
Joined: Jan 2006
The way this picture shows it the cleats on the long apron will not allow lateral expansion and will stress the top, and maybe break it.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Pic was just online, used it to show how they go on. Possibly the most important words I typed in my explanation were.
"Just oversize forstner bit" that allows all the movement I have seen in SW Ohio where we range from lows of 20% to 100% in really sticky months.
Worst thing they can do is cook ya and eat ya
GW
Posts: 7,581
Threads: 0
Joined: Jan 2005
Location: New Zealand
I just knock up a wooden version of that. Wooden blocks with a L shape at the end, that fits into the dado on the apron. If it eventually fails? Well it's easy enough to fix.
If you forget to cut the dado, use a slot cutter. The dado doesn't need to go all the way into the corners.
Posts: 2,819
Threads: 1
Joined: Jun 2004
Location: Eagle River Alaska
Steve N said:
Just because they are faster. Just oversize forstner bit, and screw, get em all set, flip and center top, screw again
If I remembered to cut that darn dado, the kind Barn showed work as well, but if you forget the groove until you are ready to assemble it just isn't convenient to make it after you have glued up the frame.
It doesn't look fast and easy to me. I almost screamed before the video ended.
https://youtu.be/SE57ZfN0ANg
Alaskan's for Global Warming
Eagle River AK
![[Image: usa-flag-waving-united-states-of-america...if-clr.gif]](http://3.bp.blogspot.com/-SdvKu-L208M/VZUtWiQXwrI/AAAAAAABPpQ/J-sZlaYEagg/s1600/usa-flag-waving-united-states-of-america-animated-gif-clr.gif)
