Posts: 66,155
Threads: 1
Joined: Mar 2007
Location: Massachusetts
Friend needs a plan in order to build an access and sitting deck for an 18 foot round pool.
We've looked on line, such as pool decks dot com, but nothing pops out at us.
We just want a nice, simple plan....
Any help out there?
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
He can't lay it out himself?
check troublefreepool.com, if plans aren't there folks on the forum can help design it.
Posts: 66,155
Threads: 1
Joined: Mar 2007
Location: Massachusetts
crokett™ said:
He can't lay it out himself?
check troublefreepool.com, if plans aren't there folks on the forum can help design it.
Apparently not.
Thanks.
Posts: 3,466
Threads: 0
Joined: Mar 2001
Location: Commerce Township, MI
When I built by deck for a 28" pool I made pie shaped sections. I made 8 sections that were 3' wide at the narrowest. Every thing is cut at 22.5°. The section are bolted together and then decked. Add a railing and you're done. It can be unbolted if you ever need to replace the liner.
Posts: 66,155
Threads: 1
Joined: Mar 2007
Location: Massachusetts
That's interesting.
Thanks.
Posts: 36,538
Threads: 3
Joined: Nov 2004
Location: RTP, NC
That actually is interesting. The next pool I am going to do something similar. The framing will be done to correspond to the length of the pool top rail sections.