Posts: 7,421
Threads: 1
Joined: Sep 2005
Use shellac as your base coat. It will contain any odor in the finished product.
No animals were injured or killed in the production of this post.
Posts: 242
Threads: 0
Joined: Jul 2006
Just finished a book cart in red oak. Yes, the cutting stank, sanding not so much. Applied Minwax stain yesterday and this morning the shop smelled of oil based paint. Period. No stinko.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Oh also if you are running pieces through the drum sander and it gets stuck and burns or gets close to burning it'll stink you out of the shop. BTDT when the drum sander acted up... Had to open the doors and stay out for a while till the stink subsided. Sadly it let all the cool air out and the 110* air in. Then don't forget to clean the air filter and the ac coils afterwards as the stink will stay if you dont.
But like mentioned it's mainly during cutting and subsides quickly and usually gone before you stain. Nothing to worry about.
Posts: 457
Threads: 0
Joined: Jul 2006
Yeah....I thought my cats were acting out last time I used RO for a house project. Nasty until finished.
Posts: 12,046
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
Posts: 14,931
Threads: 0
Joined: Sep 2004
Location: Butler, PA
LIL,
I've worked with enough red oak over the years, but I've never noticed any real offensive smell. I wouldn't say it's the most aromatic wood I've ever worked with, but it's never driven me out of the shop. I have a basement shop and my wife smells just about everything else, but she's never complained or even asked about any smell coming from the red oak. Could this be a regional thing or caused by different types of red oak?
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 800
Threads: 0
Joined: May 2010
Bill Wilson said:
I've worked with enough red oak over the years, but I've never noticed any real offensive smell.
I agree. Red Oak just has an acrid smell to me, not offensive at all. It just smells like Oak.
Bacteria can make any wood smell yucky so perhaps that was the case here.
If I had 8 hours to cut down a tree, I'd do it in 15 minutes with a chainsaw and drink beer the other 7:45 hrs.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Bill Wilson said:
LIL,
I've worked with enough red oak over the years, but I've never noticed any real offensive smell. I wouldn't say it's the most aromatic wood I've ever worked with, but it's never driven me out of the shop. I have a basement shop and my wife smells just about everything else, but she's never complained or even asked about any smell coming from the red oak. Could this be a regional thing or caused by different types of red oak?
I use allot of red oak and it's usually not an issue. Just the slight smell not really much different than other oaks but not a big deal. However every so often you get some boards from a tree that had some sort of disease fungus whatever and the smell is very bad. Out of the last 500 bf I got for a project there were about 3 or 4 boards that smelled and two were extremely bad. But most of the time I don't get that many that stink.
I could see it getting worse if mills start milling up more diseased logs as I would assume they are cheaper. Dunnow just assuming as that's SOP in business to lower costs and increase profits. Course much of the wood is still good in the log just stinky...
Posts: 3,120
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
I had some firewood once that was mostly red oak and it stunk so bad I wouldn't bring any into the house until it was time to put it into the fireplace. I usually keep enough in the garage for the current fire I have built, but I couldn't even stand that. I came to the conclusion that a bear must have wizzed on it after it was split. Maybe it was just the smell you are referring to.
I work with oak a lot and this was the first time I had smelled something this bad. I hope I never buy any woodworking lumber that has this smell.
Frank
Posts: 20,950
Threads: 0
Joined: May 2005
digidan said:
Just finished a book cart in red oak. Yes, the cutting stank, sanding not so much. Applied Minwax stain yesterday and this morning the shop smelled of oil based paint. Period. No stinko.
"Red oak" is used for many species, as is "white." Variations in color and odor certainly exist. What you have for reds out there in CA is vastly different from the eponymous
Quercus rubra which grows in the Midwest. Sharp tannic acid smell is about it, though machining it can gain you a double handful of splinters. Dad preferred what I sent him over the NorCal varieties, which always seemed a bit greenish.
Better to follow the leader than the pack. Less to step in.