Posts: 256
Threads: 0
Joined: Feb 2011
It's a Delta radial arm saw or is it and now you see it, now you don't!
Radial Arm Saw
If you continue to cut corners, you'll end up going in circles!
It's my thumb so I'll hit it if I want to!
Posts: 31,108
Threads: 2
Joined: Mar 2003
Location: Athens, TN
Well, for $50, do you own them yet?
I bought a planer/jointer once. Turned out to be a 20" planer and an 8" jointer.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 22,711
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
I'd be on my way over.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 256
Threads: 0
Joined: Feb 2011
Mr_Mike said:
Well, for $50, do you own them yet?
I bought a planer/jointer once. Turned out to be a 20" planer and an 8" jointer.
Sometimes one must pass up even the too good to be true deals...
If you continue to cut corners, you'll end up going in circles!
It's my thumb so I'll hit it if I want to!
Posts: 24,682
Threads: 1
Joined: Jul 2002
Location: St Boni, MN
Monkey Wards saw
Mike
If you're the smartest person in the room, you're in the wrong room!
But not today...
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
gMike said:
Monkey Wards saw
Yeah, and it has a universal, or AC brush-type, motor. A hand-held circular saw on a carriage.
Some of those Wards saws had a high-speed motor output shaft you could use for a collet and router bits, and a second shaft running at blade speed. That high speed shaft would be useful as an overhead router.
I don't know what that one has, but the TPC-2608 saws definitely had universal motors. If you look close enough, you can sorta see that the blade center is below the motor center.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 4,764
Threads: 0
Joined: Sep 2009
Location: The GA Lowcountry
Even for 50, that does not seem like a great deal.
---------------------------------------------------
When something has to be done, no one knows how to do it. When they "pay" you to do it, they become "experts".
Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
gMike said:
Monkey Wards saw
Wouldn't be on my quest list..
Axehandle said:
Even for 50, that does not seem like a great deal.
Concur. Just my opinion, but just because its an old tool, does not make it a good one. These and the similar sears designs of the late 60s and up suffered from what folks call "value engineering", or how cheap can we make it and people will still buy them.
If you want something pretty cheap but well made, most of the dewalt MBC/MBF saws can be had for a c-note or less and are heads and shoulders better saws in design and manufacture than these saws. Their only downside is that they are underpowered. You could also go with one of the larger dewallys or delta saws from the same era, generally I would recommend any saw with a cast iron arm. They were expensive to make but they hold up over time.
Posts: 1,407
Threads: 2
Joined: Jun 2003
Axehandle said:
Even for 50, that does not seem like a great deal.
Agree!!
