Posts: 3,240
Threads: 0
Joined: Apr 2009
Morning all, I have a set of good Fuller countersinks albeit I think they are dull from use and some possible burning/heat...have broken & replaced the 1/8" bit twice now...also have a cheap chinese set of tapereds and then some older B&D's about 1/2 or which I've replaced the broken blades in with a sharpened nail. All that said, am looking for the latest greatest countersinks with plug cutters for use primarily with #8 screws....TIA
Stupid is forever, ignorant can be transitory.
Posts: 5,633
Threads: 0
Joined: Nov 2004
Probably not the best out there but I've had good success with the Amana Timberline brand. They are imported but Amana does a good job of qualifying their import brands and the carbide will last you quite a while.
https://www.routerbits.com/carbide-tip-c...drill-bit/
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
If you want the drill bit + countersink, I recommend Snappy. Made in the US (like Fuller). They use locking hex shafts for cordless drills. Not sure if they make round shanked bits.
Still Learning,
Allan Hill
Posts: 9,459
Threads: 0
Joined: Dec 2004
I buy some from Menards. Montana is the brand and says made in Montana USA. Sure look like the exact Kobalt ones from Chiwan though. Maybe labeled in Montana. Anyway much cheaper than the amana ones.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 332
Threads: 0
Joined: Feb 2007
A few years back, I was shopping in HD for some project supplies and was in need of some countersinks. I grabbed some they had on a display, didn't look too closely, wasn't expecting much from them. When I got home and used them for the first time, I was really impressed. Took a closer look at the packaging, they were Wolfcraft brand, (note that is 'Wolfcraft' not Woodcraft), made in Germany even!
I don't see them at my HD anymore, but looks like Amazon carries them. When my current set wears out, I plan to replace them with the same.
Posts: 4,751
Threads: 0
Joined: Aug 2006
I like the type with the hole thru it. Never chips out.
web page cs
I long for the days when Coke was a soft drink, and Black and Decker was a quality tool.
Happiness is a snipe free planer
Posts: 2,230
Threads: 0
Joined: Sep 2007
Is Fuller out of business? If not, why not get a replacement set? I got a set from Craigslist earlier this year and love my set.
That said, snappy also makes a nice set. I have ones with centrotec heads for my festool drills. I've also heard good things about Montana tools. I *think* they're the brand bridge city ships with their braces. But not positive.
Posts: 5,360
Threads: 0
Joined: Nov 2008
They are pricey, but I'm very happy with
these. Also, I believe I saw something here about sharpening counter sink bits by creating a counter sink in a piece of wood, with the bit, then applying some honing compound and running the bit in reverse.
Bob
Posts: 675
Threads: 0
Joined: Aug 2011
I like the Snappy brand, available at Woodcraft. Hardened, large diameter hex socket bolt, hex shank, and takes regular drill bits (not tapered like the Fuller). The screws I use are not tapered, so it works well for them.
Posts: 1,325
Threads: 0
Joined: Nov 2009
Location: Bowie, MD
Take a look at the LV 82° Countersink
http://www.leevalley.com/US/hardware/pag...&cat=3,41306,41328
"The best designed countersink we sell. It is chatterless and will countersink all screws from #0 to the largest.
It is ideal for chamfering hole edges (e.g., for bench dogs) up to 1-1/4" dia. as well.
An excellent tool that works equally well free hand or in a drill press. 3/8" dia. shank.
Made in USA."
I own one of these and it works well.
George
if it ain't broke, you're not tryin'
Quando omni flunkus, moritati.
Red Green
