Posts: 37
Threads: 0
Joined: Dec 2011
My DH posted about my Polka Dot plate and bowl and I was asked to post some pictures. They were fun to do and a learning experience.
The large one is 9 x 2, the small 6.25x1.75
I used craft sticks for this one. Unfortunately, the commercial dye did not penetrate all the way through, so I soaked them overnight in some aniline dye.
It is difficult to tell from the picture, but the colors are green, blue and purple.
For this one I used colored toothpicks from the grocery store.
Playing with my new friend "Joan" - she's a Jet!
P.S. I *am* the wife
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
I first have to say it is SOOO nice seeing you posting again!!!
The bowls really look nice, but how did you do the holes and where did you get the colored sticks at?
Are the bowls Maple? What is the finish and are they usable of for display?
Sorry a lot of question but I just NEED to know.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 37
Threads: 0
Joined: Dec 2011
Hi Arlin
It has been a very busy year.
The bowls are both maple. I roughed the bowl and used the index on my lathe to space the holes. The toothpicks take a 3/32 bit in the drill (I don't remember the size for the larger bowl). Bit of wood glue to hold the toothpicks and light cuts to level them, then finish as usual. Oil and wax finish.
For the larger bowl, I used craft sticks from a hobby shop and I will not use them again. The color did not go all the way through, so I soaked them overnight in an aniline dye and they came out too dark. The colors are suppose to be blue, green and purple.
The smaller one is colored toothpicks that I purchased at the grocery store.
Playing with my new friend "Joan" - she's a Jet!
P.S. I *am* the wife
Posts: 6,423
Threads: 0
Joined: Feb 2002
Location: Truro,N.S. Canada
They are all nice but, I love the one you did with the toothpicks. Beautiful work.
Mel
ABC(Anything But Crapsman)club member
Posts: 320
Threads: 0
Joined: Dec 2013
Those are very cool! Do you have a jig for drilling the holes? Would love to see your technique if you don't mind showing.
Doug
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Doug
She said she used the index on my lathe. Most lathes have one but some with 12 holes or 24 holes. My old Delta 46-460 was easy to use that way since the spindle lock did it and all I had to do is spin the spindle wheel to lock into each hole.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 2,319
Threads: 0
Joined: Mar 2008
Great idea!
I'm slow, but I do poor work.
Posts: 37
Threads: 0
Joined: Dec 2011
I used the index on my Jett, but I need to build a jig to insure the holes all go in at the same angle. Some are not quite as straight as I would like.
Playing with my new friend "Joan" - she's a Jet!
P.S. I *am* the wife
Posts: 13,934
Threads: 0
Joined: Apr 2002
Location: Texas
Very cool and very nicely done
Posts: 2,063
Threads: 1
Joined: Feb 2005
Location: Marco Island, Fl.
Love the shape and design of the bigger bowl.
