Posts: 22,411
Threads: 0
Joined: Dec 2004
Location: Monrovia, AL
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
Lets see here...
Daily detention the Band saw blade - Check!
Daily VOM for continuity the ground wire on the DC- Check!
Weekly present a hot dog to the SS and test for function - Check!
Pressure test the self -ejecting DP key and lube if required - Check!
Remove shop shoes and test treads for safety - Check!
Retract all hand plane irons - Check!
And now this....OMG, neutral the fool planer too......
No wonder I get nothing done.....
Ag
Posts: 20,950
Threads: 0
Joined: May 2005
As I used to emphasize. AFTER assuring that the aircraft is safe, check to see that you have power to the mal/nonfunctioning component. Too many chase gnats while the elephant that brought 'em stomps their butt.
My planer lever chooses either off or on, and has been bumped to off so many times I've lost track.
Better to follow the leader than the pack. Less to step in.
Posts: 12,607
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 12,892
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
I've never had that problem because the folks that designed both my planers had the foresight to know that I would do the same thing so they spared me the frustration by not including that function. The rollers always turn on my Inca and Foley Belsaw. Unfortunately, my new Mini Max J/P does have that feature and, drum roll please, yes, I've already left it in jointer mode when trying to plane a board. Didn't take long to figure it out, but..... In the end, I really don't understand why they included that feature; it's not like the drive rollers take much power when nothing is being planed. Does anyone know why it's a bad idea to leave it engaged when I'm jointing?
John
Posts: 14,748
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
John no idea on a combo machine, but on all of the 15 and 20" planers I've had through the years all of them have had a 2 range switch, and I can honestly say I've never been in a hurry, always leave mine on slo mo for the finish to win
It is my understanding if you are going to move it on a solo machine anyhow, you do it once it's running. Not sure what may happen otherwise?
Worst thing they can do is cook ya and eat ya
GW
Posts: 29,152
Threads: 1
Joined: Aug 2002
It is kinda hard on the transmission John but that is not even it
it is a safety feature so that you cannot stick your hand in the huge hole that is left when the planer table is down. that would make for a pretty wild rodeo in a pinch point location
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 22,411
Threads: 0
Joined: Dec 2004
Location: Monrovia, AL
I keep mine on slow, which is the pulled out position and it supposedly won't change speed unless the machine is on. The only thing I can figure is it will go to neutral if the machine is off, but not all the way to the other speed.
