I need a nice suitcase handle

[EricU]

wasn't there someone that was selling parts for a toolbox like a Gerstner? I have ordered everything that Lee Valley sells, and all of them were rejected by my daughter. And to be perfectly honest, I have yet to find a handle worthy of the piece.

[Cooler]

Look here: https://www.google.com/search?q=leather+...QIVAh8-Ch2G-w8R

Or approach a local harness maker and ask him to make one to specifications.

[EricU]

everyone's google search results are different, and I don't actually see anything useful there. While drafting this reply, I realized that the search terms, "handle leather luggage" should work better than "leather luggage handle." At least that search doesn't give me 10e6 returns for leather purses.

[SteveF]

I found this one

It's certainly not cheap though.

[Boatman53]

I really like the look of this one. I found it doing a handle search just like you about a year ago. I plan on this style on a project and will most likely make it myself. As soon as I find the right leather and time.



Jim

[Cooler]

SteveF said:

---

I found this one

It's certainly not cheap though.

---

You can get an OEM handle for just $60.00 right from Gerstner.

http://gerstnerusa.com/replacement-hardware

[Jack in omaha]

Hartman Luggage has a nice handle. These were very expensive luggage. Not in demand used and I buy them for a buck or so and take the handle and other usable leather parts. Look at Goodwill and thrifts or online for used ones. I buy them at garage sales they used finest quality leather. Here is a Kennedy handle that held up well

vintage handle on old tool chest

[EricU]

that is a neat handle and I really like the hardware, but if I had to make one myself, I wouldn't get done. The project it's going on is years old at this point, I really want to get it done.

I have thought about going to goodwill or thrifts. I know they are expensive new, but at this point if I don't stumble onto something I'm just going to go crazy and buy one

[Cooler]

Make the handle out of wood. I would laminate several 1/8" thick pieces with the grain going right angles to each layer. Use brass post binders to attach the leather.

Alternate walnut and maple would make an interesting lamination.

[Jack in omaha]

Woodsmith #44 did a wooden briefcase they used a handle that could be leather covered easily see sources for where the handle came from