Posts: 21,879
Threads: 0
Joined: Oct 2003
I put a new Timberwolf 1/4" blade on my Laguna LT16 and am making gentle s-curves.
They're not tight S's yet the blade is burning the wood--3/4" square cherry and walnut.
Suggestions?
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 4,764
Threads: 0
Joined: Sep 2009
Location: The GA Lowcountry
Round over the trailing edge corners of the blade is something that comes to mind.
---------------------------------------------------
When something has to be done, no one knows how to do it. When they "pay" you to do it, they become "experts".
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
I've heard of people using a blade stone to knock the edges off fresh blades.
After doing that, you might want some blade stick lube on it.
I forgot to mention that you only do the back edges on the blade. Never the teeth.
Posts: 29,152
Threads: 1
Joined: Aug 2002
are the teeth pointing downward?
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 13,930
Threads: 0
Joined: Apr 2002
Location: Texas
JGrout said:
are the teeth pointing downward?
Joe
made that mistake once i was amazed it actually cut burnt like hell but it did cut. Ill never make that again
Posts: 29,152
Threads: 1
Joined: Aug 2002
Wipedout said:
[blockquote]JGrout said:
are the teeth pointing downward?
Joe
made that mistake once i was amazed it actually cut burnt like hell but it did cut. Ill never make that again
[/blockquote]
It is one of the simplest things and it does happen. I once could have purchased a BS at a yard sale for 25 bucks and after inspecting the saw I offered to show the owner why the saw "would not cut anything " for 25 bucks
I did not take his money....He was very embarrassed but he got a saw that he could use . In the end I did get a good deal on a #7 handplane I wanted
so we both won
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 21,879
Threads: 0
Joined: Oct 2003
The teeth point down.
I'm beginning to think it's either too many tpi or I need new tires.
It cuts fine with a 1" or 1-1/4" blade.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 3,545
Threads: 1
Joined: May 2004
Location: Wisconsin
Are you cutting too fast to let the sawdust escape from the kerf? If you slow down the stock speed and sawdust escape is the problem, burning will diminish. If burning is from a dull blade passing the stock, slowing down will increase the burning.
Posts: 21,879
Threads: 0
Joined: Oct 2003
It's a brand new blade installed correct with no discernible twist or runout.
It's a 3/4" wide, 1-1/2" tall, 6" long piece.
Really shouldn't be having this much trouble.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 29,152
Threads: 1
Joined: Aug 2002
how many TPI does it have?
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
