Posts: 14,952
Threads: 0
Joined: May 2005
Location: Oklahoma
Water based
Clear now and hereafter--no amber
Brushed, not sprayed
Maximum durability
Available in quarts
Which one?
Carolyn
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url]
"It's good to know, but it's better to understand." Auze Jackson
Posts: 12,907
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
General Finishes Enduro Clear Poly. Water clear to start and forever. Chemical durability about equal to EnduroVar and higher abrasion resistance. Available in quarts. Literature says spray only but I've had no trouble applying it on smaller panels with a foam brush.
John
Posts: 850
Threads: 0
Joined: Dec 2006
Carolyn
As far as I know, polycrylic will satisfy your requirements. It looks bluish when you brush it on, but dries colorless. It has not been around long enough to prove that it is colorless forever. I have used it on a number of projects and like it. I coated my workbench with it two yr ago with no color change noticeable yet, and it is durable.
Blond shellac is not water based and is not quite as colorless as acrylic but it would be my second choice.
Doug
Posts: 14,952
Threads: 0
Joined: May 2005
Location: Oklahoma
Polycrylic is easy to apply, but I'm not satisfied with its durability.
Carolyn
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url]
"It's good to know, but it's better to understand." Auze Jackson
Posts: 8,963
Threads: 0
Joined: Sep 2010
I agree with John on Enduro Clear Poly, you can also use Crystalac Poly-Ox not quite as abrasion resistant but real good chemical resistance. Either can be applied easily with a foam brush although spraying is easier.
homo homini lupus
"The best lack all conviction, while the worst are full of passionate intensity." Yeats
Si vis pacem, para bellum
Quodcumque potest manus tua facere instaner opere Ecclesiastes
Posts: 12,907
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
MsNomer said:
Polycrylic is easy to apply, but I'm not satisfied with its durability.
You shouldn't be, and you don't have to be. Enduro Clear Poly has MUCH higher chemical durability. Completely different league.
John
Posts: 7,421
Threads: 1
Joined: Sep 2005
Well, if it is not exposed to UV, then the two part epoxy coatings are super-durable.
When wood bar tops were popular (they all seem to be granite nowadays), epoxy was the finish of choice. Of course bar tops are not generally exposed to much sunlight so UV is not an issue.
No animals were injured or killed in the production of this post.
Posts: 14,952
Threads: 0
Joined: May 2005
Location: Oklahoma
Where's a good place to buy this? Google has not been my friend.
Carolyn
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url]
"It's good to know, but it's better to understand." Auze Jackson
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
General finishes has a dealer locator on it's website, but it always pays to call the dealer in advance. I found this place in Edmond (if you're ever in the area):
Le Trouve
100 N. Broadway Ave. Suite 160
Edmond, OK 73034
405-285-9696 It's a furniture "upcycling" place, and strangely enough is the same kind of place I found near me selling GF products....though it wasn't a complete line. Anyway, if all else fails,
Woodworker's Hardware seems to carry the complete line.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 14,952
Threads: 0
Joined: May 2005
Location: Oklahoma
Thanks, everyone.
Carolyn
Trip Blog for Twelve Countries: [url=http://www.woodworkingtraveler.wordpress.com[/url]
"It's good to know, but it's better to understand." Auze Jackson
