01-17-2016, 05:39 PM
All these sharpening threads got me thinking, normally not a good thing.
i decided to check the angle on my gouges. They were way off of the 60 degree mark. So I checked the wheel and it's about 6 3/4 instead of the 8" when I locked the wolverine and vari-grind down. plus the grinding station was rebuilt at least twice in that time frame. I tried going off memory and compensating for the smaller wheel but now I really have things messed up. I checked the oneway instructions but only the first page will come iup for the veri-grind. I know Robo has the youtubes but all I could find was freehand using his platform. So, what are your favorite websites, youtubes or instructions for a winged bowl gouge?
Thanks,
Signed very embarrassed
i decided to check the angle on my gouges. They were way off of the 60 degree mark. So I checked the wheel and it's about 6 3/4 instead of the 8" when I locked the wolverine and vari-grind down. plus the grinding station was rebuilt at least twice in that time frame. I tried going off memory and compensating for the smaller wheel but now I really have things messed up. I checked the oneway instructions but only the first page will come iup for the veri-grind. I know Robo has the youtubes but all I could find was freehand using his platform. So, what are your favorite websites, youtubes or instructions for a winged bowl gouge?
Thanks,
Signed very embarrassed