Posts: 373
Threads: 0
Joined: Oct 2007
Hi all. I am looking at moving from a worksharp system to a stone sharpening setup and want some advice on affordable stones to buy. I don't do a lot of woodworking much anymore but know the importance of a sharp blade. I have my chisels, a LN low angle block, and a LN #4 to sharpen. I've seen rob cosman sharpen blades with a micro bevel in a very short period of time using stones and add camber to the edges and just think that would be a quicker, cheaper, and easier setup for me. there seems to be a large number of choices from water/ceramic/diamond, then what grits to buy, etc. looking online, you can spend a small fortune I've found out but have read of people having good success with import stones they bought on eBay. So I'm open to any advice to sharpening stones that will help keep everything nice and sharp and stay flat on a budget. Thanks
Posts: 19,999
Threads: 0
Joined: Jul 2003
Get a Norton 4000/8000 waterstone and use it for final honing and a 1000 grit stone for medium work. You can still do bevels and shaping type stuff with sandpaper. Nortons are fairly cheap and will serve you well. they also last a long time. You might put up a request for them in S&S. they come up for sale occasionally.
Carl
Posts: 1,064
Threads: 0
Joined: Sep 2004
+1!
Joseph Connors
The new Golden Rule .....
Those with the Gold make the rules!
Posts: 116,083
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 8,963
Threads: 0
Joined: Sep 2010
As you have the woorksharp to set bevels and do course sharpening you really only need a
3000x Sigma Power Select II Ceramic Water Stone to get the micro bevel nice and sharp. You could also get a 10000x for further sharpening but you don't really need it. The Sigma will out perform and outlast the Norton. You don't want to keep these in water just dunk them before use. You will eventually want a flattening plate but likely not for a year or more. Checkout the Tech link as well.
I've tried oil stones, worksharp, scary sharp, diamond paste and Norton. These are the best that I've found so far. Some folks will say that you need to go to 10000x grit or finer but I have a 10000x and rarely use it. Yes it does make a difference but not worth the trouble unless you are working burl or really tough wood. Diamond paste works better but is much messier and way more expensive.
BTW I sharpen after every use even if its only a few strokes.
homo homini lupus
"The best lack all conviction, while the worst are full of passionate intensity." Yeats
Si vis pacem, para bellum
Quodcumque potest manus tua facere instaner opere Ecclesiastes
Posts: 4,226
Threads: 0
Joined: Jan 2007
Since you already have a Worksharp, and are looking to limit your spending, why not just get either a strop or an 8000+ grit waterstone? Use the Worksharp as you currently do, and then finish up on the waterstone/strop.
Hail St. Roy, Full of Grace, The Schwarz is with thee.
Blessed art thou among woodworkers, and blessed is the fruit of thy saw, dovetails.
Holy St. Roy, Master of Chisels, pray for us sharpeners now, and at the hour of planing.
Amen.
$300 is a lot of Money!
giant Cypress: Japanese tool blog
Posts: 12,299
Threads: 0
Joined: Mar 2006
To the OP: you're opening a real can of worms here with your question! Everyone will have their opinion that works for their methods and the wood they work. I would suggest you pick one method and stick to it, disregarding the latest, greatest from the blog-o-sphere woodworking world. I would also suggest getting one of the DVD's offered by "Tools for Working Wood". One deals with waterstones, if that trips you trigger, the other deals with oitstones, if that's your poison.
After a few years, you can choose if you want to experiment, but the fact is, mostly every suggestion made will get you acceptably sharp.
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Posts: 81
Threads: 0
Joined: Jan 2009
JR1 said:
Diamond paste works better but is much messier and way more expensive.
I have a hard time finding a burr when sharpening with diamond paste - it is definitely messy - but was not that expensive to start - I like the finish with .25 micron paste on MDF
Posts: 701
Threads: 0
Joined: Aug 2007
Location: Vancouver Island, B.C. -eh!
Carl Grover said:
Get a Norton 4000/8000 waterstone and use it for final honing and a 1000 grit stone for medium work. You can still do bevels and shaping type stuff with sandpaper. Nortons are fairly cheap and will serve you well. they also last a long time. You might put up a request for them in S&S. they come up for sale occasionally.
Carl
+2
