Woodnet Forums › › Active › Woodworking Hand Tools v
Emmert K1 Vise Parts Question
Thread Modes
Emmert K1 Vise Parts Question
deeno Offline
Member
Posts: 476
Threads: 0
Joined: Jul 2006
Location: Michigan
#10
04-25-2016, 11:25 AM
I just restored the subject vice. It is missing the tilt adjustment bracket and tilt adjustment lever. Anybody have one that they want to sell? Please PM. thanks.

Dennis
Find
Reply
PCG Offline
Member
Posts: 22
Threads: 0
Joined: May 2006
Location: NH
#11
04-25-2016, 09:18 PM
I bought the missing parts for my Emmert here http://www.mprime.com/Emmert/forsaleCS.htm
Find
Reply
dustyrag Offline
Member
Posts: 217
Threads: 0
Joined: Jul 2011
Location: Carmel, Indiana
#12
04-26-2016, 09:26 AM
PCG said:


I bought the missing parts for my Emmert here http://www.mprime.com/Emmert/forsaleCS.htm



I've bought parts from the same source with equal success.
Find
Reply
ncosman Offline
Member
Posts: 312
Threads: 0
Joined: Jan 2011
#13
04-26-2016, 02:43 PM


Check out what I brought back from Philly last weekend.
I'm not sure I needed two, but for $20 bucks each the price was right
Nothing's damaged or missing and the mechanisms are all free and smooth. They are just a bit dusty and dirty (the orange color is dust not rust). All they need is some WD-40 and a pair of benchs built around them!
Hail the Iron Gods!
Find
Reply
EatenByLimestone Offline
and still hungry
Posts: 24,051
Threads: 0
Joined: Jan 2004
#14
04-27-2016, 04:54 AM
Sweet!
Matt

If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason.
-Jack Handy

Website Find
Reply
deeno Offline
Member
Posts: 476
Threads: 0
Joined: Jul 2006
Location: Michigan
#15
04-27-2016, 06:00 AM
Wow those are nice and for the price you stole them...

Thanks everyone for the link. I will check it out.
Find
Reply
Boatman53 Offline
Member
Posts: 1,474
Threads: 0
Joined: Mar 2011
#16
04-28-2016, 06:40 PM
Deeno if you want anyone else second in line,when I first got my K1 it was missing the bench part just like yours so I started making this from aluminum. I never needed to finish because I came across another but broken one for very cheap that had the parts I needed. It's your or anyone else's for the price of shipping. I know I'll never use it. Just needs a couple of holes drilled and some bolts to tie it all together. Sorry I'm a little late to the party.



Jim
http://ancorayachtservice.com/ home of the Chain Leg Vise.
Website Find
Reply
deeno Offline
Member
Posts: 476
Threads: 0
Joined: Jul 2006
Location: Michigan
#17
04-29-2016, 06:56 AM
Boatman, thank you very much for your generosity. It really is very much appreciated. I will have to decline as I do not want to be a glutton and end up with 2. Yesterday I ordered some flat stock from Enco. They had 15% off + free shipping no minimum order. I decided to try my hand at welding up a simple bracket. I started the bench modification last night and should have the vise less the tilt bracket in before the weekend is over.
Find
Reply
Boatman53 Offline
Member
Posts: 1,474
Threads: 0
Joined: Mar 2011
#18
04-29-2016, 06:59 AM
No problem, as I said late to the party. Perhaps someone else watching this thread can put it to service. The offer is still open.
Jim
http://ancorayachtservice.com/ home of the Chain Leg Vise.
Website Find
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.