Posts: 12,046
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
Painted the cabinets(inside and out), made new drawer fronts, and changed the hinges/pulls.
Cabs were made/installed in 1965, dang things are better now than new ones. Will have to repair one door where the water degraded the wood. Other than that, just popped off the trim, painted them brushed nickle, and reinstalled.
Posts: 1,084
Threads: 0
Joined: Mar 2006
The cabinets look great, nice job on the painting.
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Nicely done!
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,392
Threads: 24
Joined: Aug 2001
I dunno...IMO they still look like they're from the 70's
Dumber than I appear
Posts: 66,161
Threads: 1
Joined: Mar 2007
Location: Massachusetts
Very nicely done!!!
Looks great!
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
You should be proud of that- looks great!
Posts: 13,002
Threads: 0
Joined: Sep 2007
How did you install that dishwasher? Is that base in front of it?
Mike
Non impediti ratione cogitationis
Posts: 13,809
Threads: 0
Joined: Dec 2006
Location: KY
Posts: 12,046
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
That section of the base cabs were drawers when we bought the house. I was not about to leave a $1,500 Bosch DW. But, the counter top was too low(and covered with square white 6" by 6" tile) , so I ditched the old tile, raised the top two inches and cut out the space for the DW. And set 18" tiles for the counter top.
That is a piece of luaun to hide the base cover, which was damaged in the move.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020