Posts: 225
Threads: 0
Joined: Jan 2004
Location: Carrollton, TX
Does anyone have any experience building an X-style trestle table? My in-laws have asked that I build them one, and while I've built trestles before, never an X-style.
Looking for advice on the Xs... half-lap joinery comes to mind immediately, but I'm not sure if that's the optimal approach. FYI, the inlaws want the legs to be ~3.5" square, so the half-lap would be 1.75." Walnut is the material.
Any advice anyone can offer would be appreciated.
Thanks,
Steve
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
Half-lap is the usual approach.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 225
Threads: 0
Joined: Jan 2004
Location: Carrollton, TX
Thanks Steve - glad my gut building ideas were correct.
Posts: 4
Threads: 0
Joined: Sep 2010
If you start with 5 x 5 and shape it so the joints are heavier it will look and be sounder and will not look like it belongs on the deck.
Posts: 2,386
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
Hey, Steve, I'm building an "X-brace" Trestle table and one bench for my daughter-n-law. I have the bases finished and started on the bench top yesterday. I do not have a way to post pictures here, but if you are interested, I can email some to you. Better yet, come take a look for your self...I'll put a broom in your hand. Just kidding.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 225
Threads: 0
Joined: Jan 2004
Location: Carrollton, TX
Thank you both - Bill, as always, that's a fantastic project and the pictures are terrific.
ShovelMan - I will explore that option as well. Won't have a chance to continue this project until next month, so there is ample time to think about the next step.
Steve
Posts: 935
Threads: 0
Joined: Jul 2006
Shannon Rogers (Renaissance Woodworker) has a video series where he builds that very thing. It's worth watching.
Good judgement is the product of experience.
Experience is the product of poor judgement.
Posts: 1,407
Threads: 2
Joined: Jun 2003
1/2 lap and I would put a screw from the bottom just because its a semi-X grain glue up.
Or use epoxy.
