05-08-2016, 04:56 PM
It has been awhile but here is my latest project. This is one of the most challenging projects I have done. A lot of good things came together on this and a few things went south. One thing that came out of this was that I really learned to use a card scraper. That tool saved me when trying to flatten the book matched top. At the end, the customer loved it and that was the goal.
Description:
This box is made from Purpleheart with Yellowheart inlay, pulls, feet, and keys. The dimensions are 12"x10"x5". It features two trays 3 1/2"x8 1/2"x1/2" deep that ride on rails. The top section and drawers are divided into three sections with permanent dividers. The top and one drawer are separated into smaller sections with removable dividers. The dividers are half lapped together and come apart to enlarge the sections. The whole box has been finished with a drying oil and buffed out with Canuba wax. The hinges and lid stay are made by Brusso. The liner is a synthetic.
Description:
This box is made from Purpleheart with Yellowheart inlay, pulls, feet, and keys. The dimensions are 12"x10"x5". It features two trays 3 1/2"x8 1/2"x1/2" deep that ride on rails. The top section and drawers are divided into three sections with permanent dividers. The top and one drawer are separated into smaller sections with removable dividers. The dividers are half lapped together and come apart to enlarge the sections. The whole box has been finished with a drying oil and buffed out with Canuba wax. The hinges and lid stay are made by Brusso. The liner is a synthetic.
