Posts: 126
Threads: 0
Joined: Oct 2009
Location: South Dakota
Posts: 12,926
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
That's a nice space and light and bright, too. And I'd love to have a ceiling that high; I'd be able to store most of my lumber on end. But no finishing area? And what's with that bench?, I think it is? Is it some kind of scissors lift bench?
John
Posts: 30,422
Threads: 1
Joined: Dec 2002
Location: IL or NC <coin toss>
Love all that space!
Me too! Great space and good light.
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
Ag
Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
Thanks for sharing!
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 126
Threads: 0
Joined: Oct 2009
Location: South Dakota
jteneyck said:
That's a nice space and light and bright, too. And I'd love to have a ceiling that high; I'd be able to store most of my lumber on end. But no finishing area? And what's with that bench?, I think it is? Is it some kind of scissors lift bench?
John
Right now, there is no finishing area. If it is nice outside, i'll spray outside. If not, I'll finish inside.
Through the double doors is a 14' x 26' space that will serve as a finishing room when I build another shed for the 4 wheelers and mower.
Yes, the assembly table is a scissor lift. it's 5' x 8'. It drops down to 24" off the floor and goes up to about 40". It is very handy.
Dan
Posts: 8,526
Threads: 1
Joined: Mar 2000
Posts: 3,873
Threads: 0
Joined: Jan 2006
Love the adjustable height table. I have a small bench 42" high and it's really handy. If I had to use only the main 28" high bench I'd be hurting.
Posts: 2,488
Threads: 0
Joined: Aug 2004
03rangerfx4 said:
Yes, the assembly table is a scissor lift. it's 5' x 8'. It drops down to 24" off the floor and goes up to about 40". It is very handy.
Now I've got another reason to make my shop bigger. Easier said than done.
Did you buy the assembly table mechanism, prefab it yourself. If purchased, where?
Thanks for sharing
Jim
